Standards Catalogue

Possession Workers Manual

Rule Book Briefing Leaflet

Master Manual

Train Driver Manual

Train Operations Staff Manual

Guidance on wagon maintenance related to recommendations from RAIB reports

This technical note documents findings from all reports, bulletins, and safety digests, published by RAIB, where maintenance of rail wagons has been…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Failure of, or work on, signalling equipment - signallers' regulations

You will need this module if you carry out the duties of a signaller.

Shunting

You will need this module if you carry out the duties of a driver, guard, shunter or signaller.

Audibility and Visibility of Trains

This document mandates requirements for audible and visible warning devices such that an approaching train is clearly visible and audible to members…

Guidance on Gauging and Platform Distances

Assessment of Compatibility of Rolling Stock and Infrastructure - Gauging and Stepping Distances

Assessment of Route Compatibility of Vehicles and Infrastructure.

Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work

Rail Industry Standard for Technical Requirements for On-Track Plant and their Associated Equipment and Trolleys

Rail Industry Standard for Engineering Certification of Railborne Plant

Requirements for the Position of Infrastructure and for Defining and Maintaining Clearances

Requirements for the Size of Vehicles and Position of Equipment.

Requirements for the Application of Standard Vehicle Gauges.

Train warning systems (AWS and TPWS) and reporting signalling failures and irregularities

TW5 - Preparation and movement of trains. Defective or isolated vehicles and on-train equipment.

Preparation and movement of locomotive hauled trains (including HSTs, push-pull, postal, parcels)

TW1 - Preparation and movement of trains: General

TW8 - Level crossings

TW2 - Preparation and movement of multi-unit passenger trains

Signal passed at danger (SPAD)

T12 - Protecting personnel carrying out activities on the line that do not affect the safety of the line

Briefing leaflet

OTP - On-track plant

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.