Standards Catalogue

General Signalling Regulations

Rule Book Briefing Leaflet

Preparation and movement of trains

Changes to National Operations Publications for March 2018

Master Module Manual

Rule Book Briefing Leaflet

NR3180 Line Blockage Form

Operation of Heritage Trains

This document sets out requirements for managing the planning and operation of heritage train services on the GB mainline railway.

Post Incident and Post Accident Testing of Rail Vehicles

This document sets out requirements for post incident and post accident examination and testing of rail vehicles, with particular requirements for…

Certification and Registration of Heritage Rail Vehicles Operating on the GB Mainline Railway

This document defines the certification requirements for heritage rail vehicles (including steam locomotives) to enable them to be registered for…

Rolling Stock Electromagnetic Compatibility with Trackside CCS Subsystems

This document gives guidance on achieving rolling stock electromagnetic compatibility with control, command and signalling (CCS) subsystems, through…

Rail Traffic Loading Requirements for the Design of Railway Structures

GCGN5612 gives guidance on the background and application of the rail traffic loading requirements for the design of railway structures set out in BS…

Signing of Permissible Speeds

This document sets out requirements, rationale and guidance for signing of permissible speeds applicable to trains operated on the Great Britain (GB)…

Signing of Temporary and Emergency Speed Restrictions

This document sets out requirements, rationale and guidance for signing of Temporary Speed Restrictions (TSRs) and Emergency Speed Restrictions (ESRs)…

Vehicle Registration, Marking and Numbering

This document sets out requirements for the registration, marking and numbering of rail vehicles operating on the Great Britain (GB) mainline network.

Lineside Operational Signs

Clarification on drugs and Alcohol testing for safety-critical workers

This technical note aims to provide a greater understanding of the importance of drugs and alcohol testing for safety-critical workers by providing…

Managing Low Adhesion

This standard sets out a framework to develop, implement, monitor and review the effectiveness of site-specific plans to manage low adhesion at…

Lineside Signal and Indicator Product Design and Assessment Requirements

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority.

Rail Industry Standard for Driving Cabs

This document sets out supplementary requirements for the design, layout and operational equipment in driving cabs of rail vehicles to the Locomotive…

Section N - Single line working

Personalised Rule Book No. 13 - Person in charge of work on signalling equipment

Section B(iii) - Your general duties when you are on or near the line

Section F(ii) - Your duties if you are acting as a handsignaller

Section Q(ii) - Rail mounted maintenance machines

Section T(iii) - Protection of engineering work when the engineer takes possession of the line

Section U(i) - Temporary speed restrictions

Section Y - Accidents

Section B(i) - Your safety when you are walking on or near the line

Section B(iii) - Your general duties when you are on or near the line

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.