Standards Catalogue

Track to Train RFID Compatibility

Supplier Assurance

Vehicle Registration, Marking and Numbering

Arrangements Concerning the Non-Operation of Track Circuits During the Leaf Fall Contamination Period

This document details the requirements for identifying the need for, introduction and subsequent removal of, restrictions to normal operations to…

ERTMS/ETCS National Values

This Rail Industry Strandard (RIS) contains requirements and guidance for a process to determine or revise a set of values of ERTMS/ETCS National…

Ground Frames and Shunters' Releases

This document sets out the interface requirements for ground frames and shunters' releases that may be operated by railway undertaking personnel.

Guidance on the Operation and Traffic Management Technical Specification for Interoperability

This document provides guidance on interpretation of points within the Operation and Traffic Management TSI (OPE TSI) where, owing to incomplete or…

Duties of the machine controller (MC) and on-track plant operator on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the machine controller (MC) and on-track plant operator on ERTMS lines.

Identification of Signalling and Related Equipment

This document sets out the principles for ensuring that signalling and related assets are uniquely identified.

Tilting Trains: Controlling Tilt Systems to Maintain Clearances

This document sets out the means by which Tilting Trains are permitted to utilise the tilt mechanism over routes, parts of which contain sections…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

Provision of Signage at Power Changeover Locations

This document sets out requirements and guidance for provision of signage at power changeover locations for multi-mode rolling stock.

Maintaining the Visibility of Signals and Operational Signs

This document sets out requirements and guidance to ensure that the visibility of signals and operational signs are not adversely affected during the…

Medical Fitness Assessment

This document sets out requirements and guidance for the management of medical fitness assessment for safety critical workers on the GB mainline…

Lineside Operational Signs

This document sets out requirements, rationale and guidance for the application of lineside operational signs published in the RSSB catalogue. It also…

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Reference Limits for Freight Wagon Defects

This document sets out the criteria for addressing defects in freight wagons arising during operation, and the restrictions on their use that apply.

Requirements for the operation of freight trains and the conveyance of dangerous goods by any train

This document sets out requirements and guidance relating to the safe operation of freight trains and the safe movement of dangerous goods.

Speeds

You will need this module if you carry out the duties of a driver, signaller or train preparer.

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Duties of the person in charge of the possession (PICOP)

You will need this handbook if you carry out the duties of the PICOP.

Duties of the engineering supervisor (ES) in a possession

You will need this handbook if you carry out the duties of the ES in a possession.

Working of on-track machines (OTM)

You will need this module if you carry out the duties of a driver of an on-track machine, an operator of an on-track machine or a signaller.

Rule Book Handbook Issue History

This document contains updates to align with changes to Rule Book handbook issues (GERT8000)

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000)

Signals, Handsignals, Indicators and Signs Handbook

You will need this handbook if you need to understand the meaning of signals, handsignals, indicators and signs.

Rule Book Briefing Leaflet

Changes to National Operations Publications for September 2024

High visibility clothing obligatory

This document provides design details for BA01 sign - High visibility clothing obligatory.

Temporary speed restriction repeater warning board

Supplementary sign at crossings where trains pass in excess of 100 mph

Warning sign for a non-vehicular crossing (PCR diagram 101)

Private level crossings: operating instructions for barrier (PCR diagram 104)

Signs for use with miniature red / green lights with and without a telephone (PCR diagrams 107 and 108)

Instructions for Use at a Crossing with Miniature Stop Lights and User-Operated Barriers (PCR diagram 110)

Reminder at a crossing with user-operated barriers (PCR diagram 112)

Instructions to non-vehicular traffic at a crossing with miniature stop lights (PCR diagram 114)

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

Code of Practice for Defect Reporting for OTP, Plant and Equipment

This Code of Practice details the systems to have in place so that all safety related defects are reported and that other reported defects are checked…

Code of Practice for Defective OTP Safety Critical Equipment

This code of practice has been developed to describe the actions to be taken by Plant Lead, Machine/Crane controllers and machine operators in the…

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

This Code of Practice is intended to provide explanation and guidance to manufacturers, converters, owners and users of road rail excavator cranes…

Code of Practice for Lifting Operations Using Manually Propelled Rail Handlers (MPRH)

This Code of Practice details the various minimum requirements for Lifting and handling loads with Manually Propelled Rail Handlers (MPRH). This Code…

Code of Practice for Tandem Lifting with Two Excavator Cranes

This Code of Practice details the control measures to be applied when using two excavator cranes to lift a load simultaneously. This Code of Practice…

Code of Practice for Flailing Operations using OTP

This Code of Practice details the actions to be taken, when planning for, and undertaking flailing operations. This Code of Practice applies to all…

Code of Practice for Planning for the use of non-rail mounted plant

This Code of Practice details minimum requirements for planning and mitigating the risks when delivering work using non rail mounted plant that could…

Code of Practice for Independence and Competence of LOLER Thorough Examiners

This Code of Practice details the various minimum requirements for independence of the examiner for Thorough Examination of lifting equipment and…

Code of Practice for On, Off and Cross Tracking of On Track Plant (OTP)

This Code of Practice is intended to give guidance for the safe on, off and cross tracking of OTP to mitigate the possibility of derailing or…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…