Standards Catalogue

Ground Frames and Shunters' Releases

This document sets out the interface requirements for ground frames and shunters' releases that may be operated by railway undertaking personnel.

Guidance on the Operation and Traffic Management Technical Specification for Interoperability

This document provides guidance on interpretation of points within the Operation and Traffic Management TSI (OPE TSI) where, owing to incomplete or…

Duties of the machine controller (MC) and on-track plant operator on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the machine controller (MC) and on-track plant operator on ERTMS lines.

Identification of Signalling and Related Equipment

This document sets out the principles for ensuring that signalling and related assets are uniquely identified.

Tilting Trains: Controlling Tilt Systems to Maintain Clearances

This document sets out the means by which Tilting Trains are permitted to utilise the tilt mechanism over routes, parts of which contain sections…

Controlling the Speed of Tilting Trains through Curves

This document sets out the means by which tilting trains may be operated at higher speeds than non-tilting trains around curves.

Engineering Requirements for Dispatch of Trains from Platforms

This document sets out the minimum engineering requirements for the facilities used in dispatching trains from platforms.

Passenger Train Dispatch and Platform Safety Measures

Working of on-track machines (OTM)

Rule Book Hand Book Issue History

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

Possession Workers Manual

Train Operations Staff Manual

Track Workers Manual

Master manual

General signalling regulations

Rule Book Module Issue History

Rule Book Handbook Issue History

Signals, Handsignals, Indicators and Signs Handbook

Changes to National Operations Publications for June 2024

Driver’s Single Line Working Ticket

This form should be used by the driver when single line working applies.

ETCS stop marker

Platform Stop Markers

Lower pantograph

25 kV AC electrification boundary - entering

Warning of traction system changeover

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.