Standards Catalogue

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

IWA, COSS or PC blocking a line

You will need this handbook if you carry out the duties of a IWA, COSS or PC blocking a line.

Possession of a running line for engineering work

You will need this module if you carry out the duties of a driver or signaller.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Duties of the person in charge of the possession (PICOP)

You will need this handbook if you carry out the duties of the PICOP.

Duties of the engineering supervisor (ES) in a possession

You will need this handbook if you carry out the duties of the ES in a possession.

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

ETCS Location Marker

This document provides design details for sign AB10 - ETCS location marker.

Permissible speed acceleration indicator

This document provides design details for sign AD06 - Permissible speed acceleration indicator.

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

Pink Pages Briefing Leaflet

Working Manual for Rail Staff Handling and Carriage of Dangerous Goods - Appendix 1 - List of Dangerous Goods with their United Nations Number, Dangerous Goods Class and TOPS Commodity Code

Changes to National Operations Publications for December 2018

Line Blockage Form

This form is used by the Signaller, IWA, COSS, PC and SWL to record the details of a line blockage

ERTMS level 2 train signalling regulations

Regulations for train signalling by the European rail traffic management system (ERTMS). You will need this module if you carry out the duties of a…

Emergency Special Working Ticket

This form is to be used by the driver and signaller during emergency special working.

Train stopped by train failure

Rule Book Hand Book Issue History

Station duties and train dispatch

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Code of Practice for Piling using OTP

Code of Practice for Planning for the Use of Mobile Operated Plant

OTM - Movements Authority and Associated Speeds Within a T3 Possession

On Who's Authority

Code of Practice for Any Line Open (ALO) Working

Seasonal Operating of OTP

Code of Practice for Flailing Operations using OTP

Code of Practice for OTP Recovery

Code of Practice for Management of Operational Risk and SPAD Avoidance Strategy

Code of Practice for Hiring in of Conductor Drivers