Standards Catalogue

Duties of the person in charge of the possession (PICOP) on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the person in charge of the possession (PICOP) on ERTMS lines. This document has been…

Engineering Supervisor's Certificate

Engineering supervisor's certificate for use on ERTMS level 2 without lineside signals routes.

Duties of a level crossing attendant

You will need this handbook if you carry out the duties of a level crossing attendant. This document has be updated as part of the December 2015 Rule…

Possession arrangements form (T3 ERTMS)

Possession arrangements form (T3 ERTMS) for use on ERTMS level 2 without lineside signals routes.

Guidance on 'Signals, Railway Track, Explosive' (also known as 'Detonators')

This guidance is intended to assist infrastructure managers and railway undertakings in understanding their responsibilities in relation to…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document defines the requirements for the DC conductor rail energy system and the interfaces to rolling stock operating over the DC electrified…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document defines the interface requirements to the DC conductor rail energy system for all rolling stock operating over the DC electrified…

Guidance on DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document gives guidance on interpreting the requirements of Railway Group Standard GLRT1212 Iss 1 DC Conductor Rail Energy Subsystem and…

Guidance on Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document gives guidance on interpreting the requirements of Railway Group Standard GMRT2113 Iss 1 Rolling Stock Subsystem and Interfaces to DC…

Pink Pages Briefing Leaflet

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

Engineering Design of On-Track Machines in Travelling and Working Modes

This document sets out requirements and guidance for the application of the BS EN 14033:2017 series for on-track Machines (OTMs) in their travelling…

Reference Limits for Freight Wagon Defects

This document sets out the criteria for addressing defects in freight wagons arising during operation, and the restrictions on their use that apply.

Lineside Operational Signs

This document sets out requirements, rationale and guidance for the application of lineside operational signs published in the RSSB catalogue. It also…

Provision of Signage at Power Changeover Locations

This document sets out requirements and guidance for provision of signage at power changeover locations for multi-mode rolling stock.

Requirements for the operation of freight trains and the conveyance of dangerous goods by any train

This document sets out requirements and guidance relating to the safe operation of freight trains and the safe movement of dangerous goods.

Maintaining the Visibility of Signals and Operational Signs

This document sets out requirements and guidance to ensure that the visibility of signals and operational signs are not adversely affected during the…

Medical Fitness Assessment

This document sets out requirements and guidance for the management of medical fitness assessment for safety critical workers on the GB mainline…

Junction signal sighting

This technical note has been issued to help the industry manage the sighting of colour light junction signals. This document is responding to the RAIB…

Section D - Passing signals at sanger and making movements in the wrong direction

Section F(i) - Manual operation of power operated points

Section H(i) - Working of trains - Normal arrangements

Section J - Shunting

Section M - Trains stopped by accident, failure, obstruction or other exceptional incident

Section P(ii) - Working of single and bi-directional lines by pilotman

Section Q(iii) - Self-propelled road/rail recovery vehicles

Section T(ii) - Protection of engineering work when the engineer does not take possession of the line

Section T(iiiA) - Protection of engineering work in sidings

Section U(ii) - Emergency speed restrictions

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.