Standards Catalogue

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

TW1 Addendum - Preparation and movement of Trains. General. Additional instructions protecting personnel when servicing and repairing vehicles

TW8 - Level crossings

G2 - Personal safety when walking on or near the line, or when on the lineside

TS4 - Electric token block regulations

TS5 - Tokenless block regulations

TS6 - Instructions for out-of-gauge loads

TS7 - No-signaller token regulations

TS8 - One-train working regulations

Section T(i) - Protection of persons carrying out activities on the line that do not affect the safety of trains

Amendments & alterations master Rule Book June 2003

Temporary speed restriction warning boards (km/h)

This document provides design details for AF02k sign - Temporary speed restriction warning boards (km/h).

Temporary speed restriction warning boards (mph)

This document provides design details for AF02m sign - Temporary speed restriction warning boards (mph).

Temporary speed restriction speed indicators (km/h)

This document provides design details for AF04k sign - Temporary speed restriction speed indicators (km/h).

Permissible speed warning indicators (km/h) for limited clearance

This document provides design details for AD04k sign - Permissible speed warning indicators (km/h) for limited clearance.

Temporary speed restriction speed indicator (mph)

This document provides design details for AF04m sign - Temporary speed restriction speed indicator (mph).

Permissible speed warning indicators (mph)

This document provides design details for AD03m sign - Permissible speed warning indicators (mph).

Permissible speed warning indicators (km/h)

This document provides design details for AD03k sign - Permissible speed warning indicators (km/h).

Permissible speed indicators (mph) for limited clearance

this document provides design details for AD02m sign - Permissible speed indicators (mph) for limited clearance.

Termination of special AWS working

This document provides design details for AA04 sign - Termination of special AWS working.

Commencement of special AWS working

This document provides design details for AA03 sign - Commencement of special AWS.

Crane Controller Competence for Twin Jib Cranes

Code of Practice for Any Line Open (ALO) Working

Code of Practice for Handling Serviceable Rail with RRV Excavator Cranes Including Thimbling

Code of Practice for Management of Sidings Safety Surveys

Code of Practice for Brake Testing of RRVs

Code of Practice for Safe Use of Remote Controls

Code of Practice for OTP Recovery

Code of Practice for Maintenance, Operation and Testing of Track Jacks

This document details the use, maintenance, thorough examinations and testing required for all types of track jacks used on the rail network. The…

Code of Practice for Lifting Operations Using Rail Mounted Gantries

Code of Practice for Defect Reporting for OTP, Plant and Equipment