Standards Catalogue

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document defines the requirements for the DC conductor rail energy system and the interfaces to rolling stock operating over the DC electrified…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document defines the interface requirements to the DC conductor rail energy system for all rolling stock operating over the DC electrified…

Guidance on DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document gives guidance on interpreting the requirements of Railway Group Standard GLRT1212 Iss 1 DC Conductor Rail Energy Subsystem and…

Guidance on Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document gives guidance on interpreting the requirements of Railway Group Standard GMRT2113 Iss 1 Rolling Stock Subsystem and Interfaces to DC…

Guidance on 'Signals, Railway Track, Explosive' (also known as 'Detonators')

This guidance is intended to assist infrastructure managers and railway undertakings in understanding their responsibilities in relation to…

Defective On-Train Equipment

Guidance on Defective on-Train Equipment

Lineside Signal Spacing and Speed Signage

Guidance on Lineside Signal Spacing and Speed Signage

Rail Industry Standard for Track to Train RFID compatibility

Train warning systems (AWS and TPWS) and reporting signal failures and irregularities

Trains or shunting movements detained, or vehicles left, on running rails

TW5 - Preparation and movement of trains. Defective or isolated vehicles and on-train equipment

TW3 - Preparation and movement of locomotive-hauled trains

TW2 - Preparation and movement of multiple-unit passenger trains

TW1 - Preparation and movement of trains. General

Working single lines with or without a train staff or token

TW7 - Wrong-direction movements

T11 - Movements of engineering trains under T3 arrangements

T3 - Possession of the line for engineering work

High visibility clothing obligatory

This document provides design details for BA01 sign - High visibility clothing obligatory.

Temporary speed restriction repeater warning board

Supplementary sign at crossings where trains pass in excess of 100 mph

Warning sign for a non-vehicular crossing (PCR diagram 101)

Private level crossings: operating instructions for barrier (PCR diagram 104)

Signs for use with miniature red / green lights with and without a telephone (PCR diagrams 107 and 108)

Instructions for Use at a Crossing with Miniature Stop Lights and User-Operated Barriers (PCR diagram 110)

Reminder at a crossing with user-operated barriers (PCR diagram 112)

Instructions to non-vehicular traffic at a crossing with miniature stop lights (PCR diagram 114)

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.