Standards Catalogue

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Requirements for the Application of Standard Vehicle Gauges.

Requirements for the Position of Infrastructure and for Defining and Maintaining Clearances

Requirements for the Size of Vehicles and Position of Equipment.

Rail Industry Standard for Portable and Transportable Plant Used for Infrastructure Work

Rail Industry Standard for Technical Requirements for On-Track Plant and their Associated Equipment and Trolleys

Rail Industry Standard for Engineering Certification of Railborne Plant

Guidance on Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document gives guidance on interpreting the requirements of Railway Group Standard GMRT2113 Iss 1 Rolling Stock Subsystem and Interfaces to DC…

Guidance on 'Signals, Railway Track, Explosive' (also known as 'Detonators')

This guidance is intended to assist infrastructure managers and railway undertakings in understanding their responsibilities in relation to…

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document defines the requirements for the DC conductor rail energy system and the interfaces to rolling stock operating over the DC electrified…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document defines the interface requirements to the DC conductor rail energy system for all rolling stock operating over the DC electrified…

Tokenless block regulations

You will need this module if you carry out the duties of a signaller in a tokenless block area.

No-signaller token regulations

You will need this module if you carry out the duties of a signaller in a no-signaller token area. You will also need module TS8 One-train working…

One-train working regulations

You will need this module if you carry out the duties of a signaller in a one-train working area, whether or not a train staff is provided, and a…

Possession of an ERTMS running line for engineering work where lineside signals are not provided

You will need this module if you carry out the duties of a driver or signaller.

General safety responsibilities and personal track safety for non-trackworkers

You will need this module if you carry out the duties of: • a train driver • a guard • a shunter • a designated person (DP) • a signaller • a crossing…

Handsignalling duties

This handbook is for those personnel who carry out handsignalling duties

Absolute block regulations

You will need this module if you carry out the duties of a signaller in an absolute block area.

Failure of, or work on, signalling equipment - signallers' regulations

Rule Book Briefing Leaflet

Level crossings - signallers' regulations

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Audit Protocol for Supply of Possession-only Rail Vehicles with and without Operators

Code of Practice for On and Off Tracking of Road-rail Vehicles

Code of Practice for Safety Related Defect Reporting & Performance Monitoring for Hired in RRVs and RMMMs

Code of Practice for Handling Serviceable Rail with Road-Rail Excavator Cranes in Rail Mode Including Thimbling

Checklist for application Note 6 (Maintenance)

Code of Practice for Railway Safety Critical Maintenance Elements of Small Plant and Equipment

Application Note 6 - Maintenance

Code of Practice for Basic Training, Assessment and Post-qualifying Monitoring - OTM Drivers

Code of Practice for OTM Traction

Code of Practice for OTM Driver - Task Analysis