Standards Catalogue

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

On-Track Plant, Trolleys and Associated Equipment

This document sets out requirements and guidance for engineering of on-track plant, trolleys and associated equipment.

Determination of Aerodynamic Rolling Moment Coefficient

This Guidance Note provides guidance to railway undertakings and infrastructure managers for methods of undertaking wind tunnel tests to determine…

Engineering Design of On-Track Machines in Running Mode

This document sets out requirements for the design of on-track Machines (OTMs) in running mode.

Section P(ii) - Working of single and bi-directional lines by pilotman

Section E(i) - Failure, maintenance and renewal of signalling equipment

Section E(ii) - Working of trains during failure, maintenance and renewal of signalling equipment

Section G - Your duties when working at a passenger station

Section P(i) - Working of single lines

Section Q - On-track Plant

Section H (iv) - Working of the automatic brake on locomotive hauled and multiple unit trains

Section Z(i) - A.C. electrified lines

Form for Reporting a Signal/AWS/TPWS/TVM Failure or Irregularity

Section H(v) - Working of on-track machines - Normal arrangements

Distant signal sign and identification plate

This document provides design details for AC02 sign - Distant signal sign and identification plate.

Automatic signal sign and identification plate

This document provides design details for AC03 sign - Automatic signal sign and identification plate.

Semi-automatic signal sign and identification plate

This document provides design details for AC04 sign - Semi-automatic signal sign and identification plate.

Intermediate block home signal sign and identification plate

This document provides design details for AC05 sign - Intermediate block home signal sign and identification plate.

CSR alias plate

This document provides design details for AC06 sign - CSR alias plate.

SPAD indicator sign and identification plate

This document provides design details for AC07 sign - SPAD indicator sign and identification plate.

Points indicator sign

This document provides design details for AC08 sign - Points indicator sign.

Ground position light signal identification plate

This document provides design details for AC09 sign - Ground position light signal identification plate.

ETCS identification plate

This document provides design details for AC11 sign - ETCS identification plate.

GSM-R alias plate

This document provides design details for AC12 sign - GSM-R alias plate.

Passing between or close to the end of vehicles

This poster is provided by the M&EE Networking Group to remind staff about personal safety when when to passing between or close to the end of…

Depot Pit Protection

This poster is provided by the M&EE Networking Group to remind depot staff about the risk of failing into uncovered pits. Cover pits or use visual…

Rail Handling – Rail Turner Awareness

This poster is provided by the M&EE Networking Group to remind industry about the competence requirements necessary for the Crane Controller when…

RCI Motion Cut

OTP Tandem Lift

Crane Controller Competence for Twin Jib Cranes

Lift & Carry using OTP in Road Mode

Lifting Accessories Misuse

Code of Practice for OTM Ready to Run Card

OTP Mechanical Movement Limiting Device Awareness