Standards Catalogue

Traction batteries in rolling stock depots

The technical note aims to inform the industry on handling, storage and the safe maintenance practices of lithium-ion traction battery packs within…

Fire compartmentation and Li-ion traction batteries

The technical note aims to inform the industry on adequate design considerations for crashworthiness and fire barrier considerations to minimise the…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Rail Traffic Loading Requirements for the Design of Railway Structures

Engineering Design of On-track Machines in Running Mode

Rail Industry Standard for the Design of On-track Machines in Working and Travelling Modes

Compatibility Requirements for Track Circuit Assisters (TCAs) on Rail Vehicles

This sets out Great Britain (GB) requirements on where TCAs shall be fitted onto a vehicle and how they shall be set up.

Functionality and Management of Track Circuit Assisters (TCAs) on Rail Vehicles

This document sets out requirements for the functionality, testing and management of failures of TCAs on rail vehicles.

Recommendations for the Risk Assessment of Buffer Stops and End Impact Walls

This document gives details of a recommended method which, if followed, would meet the requirements of section 11, Buffer Stops and End Impact Walls,…

Rail Industry Standard for Station Infrastructure

This document has been published to provide a voluntary standard on station infrastructure, for infrastructure managers responsible for managing and…

Route Level Assessment of Technical Compatibility between Vehicles and Infrastructure

GB Requirements for Platform Height, Platform Offset and Platform Width

Interface between Station Platforms, Track, Trains and Buffer Stops

Section V - Broken rails and bridge strikes

Section R - Loading or unloading rail vehicles during engineering work

Section B(ii) - Your safety when you are working on or near the line

Section E - Failure, repair, renewal and maintenance of signalling equipment

Section H(ii) - Working of trains-out of course working and defective vehicles

Section L - Level crossings

Section N - Single line working

Section U(i) - Temporary speed restrictions

Section W - Bad weather affecting railway infrastructure

Personalised Rule Book No. 4 - Train driver

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Passing between or close to the end of vehicles

This poster is provided by the M&EE Networking Group to remind staff about personal safety when when to passing between or close to the end of…

Depot Pit Protection

This poster is provided by the M&EE Networking Group to remind depot staff about the risk of failing into uncovered pits. Cover pits or use visual…

Rail Handling – Rail Turner Awareness

This poster is provided by the M&EE Networking Group to remind industry about the competence requirements necessary for the Crane Controller when…

RCI Motion Cut

OTP Tandem Lift

Crane Controller Competence for Twin Jib Cranes

Lift & Carry using OTP in Road Mode

Lifting Accessories Misuse

Code of Practice for Rail Mounted Manually Propelled Equipment

Code of Practice for OTM Ready to Run Card