Standards Catalogue

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Functioning and Control of Exterior Doors on Passenger Vehicles

This document provides GB requirements for exterior doors and Selective Door Operation (SDO) systems.

The Management of Packet 44 Applications

Guidance on High-Integrity Software-Based Systems for Railway Applications

In-Service Examination and Reference Limits for Freight Wagons

Weekly Operating Notice, Periodical Operating Notice and the Sectional Appendix

This document sets out the arrangements for the production of information relating to engineering work, alterations to track and signalling…

Guidance on the Application of the Control Command and Signalling TSI

This guidance note has been produced to provide application guidance on the CCS TSI. The CCS TSI was adopted by Commission Regulation (EU) 2016/919/EC…

Positioning of Lineside Telephones

This document sets out the requirements for assessing the positioning of lineside operational telephones and the provision of information labels.

Information for Safe Train Operation

This document sets out requirements for information to be provided by the railway undertaking to the infrastructure manager regarding train running on…

Provision of Information and Signs for Access on the Railway

Operational Security Response Planning

Pilot's Single Line Working Form

You will need this form if you carry out the duties of a pilot.

Single Line Working

You will need this module if you carry out the duties of a driver, pilot or signaller.

Working single and bi-directional lines by pilot

You will need this module if you carry out the duties of a driver, pilot or signaller.

Pilot's form for working of single and bi-directional lines by pilot

This form is used by the pilot to record the details for the working of trains over single or bi-directional lines by pilot, during a failure or when…

Signaller's Form for Working Single and Bi-Directional Lines by Pilot

This form is used by signallers to record the details for the working of trains over a single or bi-directional line by pilot, during a failure or…

Duties of the engineering supervisor (ES) or safe work leader (SWL) in a possession on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the ES or SWL on ERTMS lines.

Rule Book Handbook Issue History

Driver’s Single Line Working Ticket

Station duties and train dispatch

Preparation and movement of trains: Defective or isolated vehicles and on-train equipment

Gradient sign

This document provides design details for AK202 - Gradient sign

Spring catch board

This document provides design details AK204 sign - Spring catch board.

Train class specific instruction

This document provides design details for AK206 sign - Train class specific instruction.

Coasting board

This document provides design details for AK208 sign - Coasting board.

Warnings for train crew

This document provides design details for AK210 sign - Warnings for train crew.

Infrastructure location names, information and references

This document provides design details for AK212 sign - Infrastructure location names, information and references.

Warnings

This document provides design details for BA02 sign - Warnings.

Termination of adhesion condition

This document provides design details for AK214 sign - Termination of adhesion condition

Mind the gap / step

This document provides design details for CA02 sign - Mind the gap / step.

Telephone number

This document provides design details for DA01 sign - Telephone number

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.