Standards Catalogue

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Lineside Signal Aspects and Indications

This document specifies the appearance of lineside signal aspects and indications and the information they convey.

Lineside Signalling Layout Driveability Assessment Requirements

This document sets out requirements for assessing the driveability of lineside signalling systems, and guidance on the process of assessing changes to…

Signalling Layout and Signal Aspect Sequence Requirements

750 V and 1500 V DC Overhead Lines and corresponding Rolling Stock requirements

This document specifies requirements and associated rationale and guidance at the interface between energy subsystems and rolling stock subsystems for…

Magnetic Track Brakes

This document sets out requirements for driver-actuated magnetic track brakes fitted to rail vehicles used on the GB mainline railway.

Train to Infrastructure RFID Compatibility

This document sets out requirements for an RFID system where the tag is on the train and the reader is on the infrastructure. It includes specific…

Guidance on the Use of Escrow Agreements for Rail Applications

This document provides guidance on the use of escrow agreements and is intended to assist in understanding the application of escrow agreements. The…

Reporting of Safety Related Information

This document sets out requirements for entering information into the industry's Safety Management Intelligence System (SMIS), and for how that…

Calculation of Enhanced Permissible Speeds for Tilting Trains

This document sets out requirements and guidance for train manufacturers or operators to calculate enhanced permissible speeds for curves on a…

Guidance Note for Safe Integration of CCS Systems with Train Operations

This document provides guidance on assessment of changes that affect the interfaces between Control Command and Signalling (CCS) systems and train…

Rule Book Briefing Leaflet

Rule Book Briefing Leaflet

Changes to National Operations Publications for June 2021

Train Driver Manual

Signaller and Signalling Technician Manual

Train Operations Staff Manual

Shunting

Master Module Manual

Managing incidents, floods and snow

You will need this module if you carry out the duties of a driver or signaller. You will also need this module if you are likely to be involved in, or…

Duties of the person in charge of loading and unloading rail vehicles during engineering work

You will need this handbook if you carry out the duties of the person in charge of loading and unloading rail vehicles during engineering work.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Seat belts

This poster is provided by the M&EE Networking Group to remind industry that wearing the seat belt could save your life.

Safety within depot yards and sidings

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by train movements within depot yards and sidings.

Code of Practice Planning for the Use of Mobile Operated Plant

This Code of Practice details minimum requirements for planning for the use of mobile operated plant excluding lifting operations. It applies to…

Code of Practice for Loading of OTP

This Code of Practice gives guidance on the arrangements for loading and securing of typical loads associated with all on-track plant (OTP) whilst on…

Points run through

This poster is provided by the M&EE Networking Group to remind industry that points run throughs only occur when the rules are not followed.

Code of Practice for Rail Mounted Manually Propelled Equipment

This Code of Practice details the use and some aspects of the design and maintenance of rail mounted manually propelled equipment (trolleys and…

Objects left on the line

This poster is provided by the M&EE Networking Group to remind industry of the measures to take to reduce the hazard of objects being left on the…

Use of Mobile Devices

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by using a mobile phone whilst driving a train. Further…

Code of Practice for OTM Route Conducting Policy

This Code of Practice contains requirements and guidance for OTM driver’s route conducting or being conducted. Also to assist in the improvement of…

Code of Practice for Control of Mobile Communication Equipment use in Driving Cabs

This Code of Practice contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains. It sets…