Standards Catalogue

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

ERTMS/ETCS DMI National Requirements

Lineside Signals, Indicators and Layout of Signals

Guidance on Lineside Signals, Indicators and Layout of Signals

Guidance on the Application of the Control of Electromagnetic Fields at Work Regulations

Sanding Equipment

Compatibility Requirements for Braking Systems of Rail Vehicles

This document defines the compatibility and performance requirements for the braking systems of rail vehicles for operation in trains on the mainline…

Rail Industry Standard for the Identification of Roller Bearings Defects

Rail Industry Standard for Verification of Conformity of Engineering Change to Rail Vehicles

Managing Drivers on Routes Undergoing Significant Change - Good Practice Guide

This Good Practice Guide (GPG) on managing drivers on routes undergoing sifnificant change represents a collation of RSSB research and good practice…

Guidance on the Use of On-Train Satellite Positioning Technology Based Locator for Railway Applications

This document provides guidance on good practice for the specification, selection, implementation, and installation of on-train satellite positioning…

General duties of an individual working alone (IWA)

This handbook is for those personnel with general duties of an individual working alone (IWA).

General duties of a controller of site safety (COSS)

This handbook is for those personnel who have the general duties of a controller of site safety (COSS).

Duties of the machine controller (MC) and on-track plant operator

You will need this handbook if you carry out the duties of the machine controller (MC) and on-track plant operator.

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Personnel asking for trains to be stopped form

This form is used by signallers to record the details when personnel ask for a line to be blocked for their own protection when going on or near the…

Level crossings - signallers' regulations

You will need this module if you carry out the duties of a signaller in an area where there is a level crossing.

Preparation and movement of trains

You will need this module if you carry out the duties of a driver, guard, shunter, signaller, train preparer or competent person.

General duties and track safety for track workers

This handbook is for those personnel who need to go on the operational railway to carry out their duties, with the exception of a train driver, guard,…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

IWA, COSS or PC blocking a line

You will need this handbook if you carry out the duties of a IWA, COSS or PC blocking a line.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Code of Practice for Piling using OTP

Code of Practice for Planning for the Use of Mobile Operated Plant

OTM - Movements Authority and Associated Speeds Within a T3 Possession

On Who's Authority

Code of Practice for Any Line Open (ALO) Working

Seasonal Operating of OTP

Code of Practice for Flailing Operations using OTP

Code of Practice for OTP Recovery

Code of Practice for Management of Operational Risk and SPAD Avoidance Strategy

Code of Practice for Hiring in of Conductor Drivers