Standards Catalogue

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Guidance on Radio Electronic Token Block (RETB)

This document presents information gathered from legacy and industry documentation to provide a single document that explains the RETB system. It…

Guidance on Block System Interface Requirements

This document provides guidance and rationale to support the requirements in GKRT0055 for block system interfaces between signalling infrastructure…

Block System Interface Requirements

This document mandates the requirements for block system interfaces between signalling infrastructure and railway operations.

Guidance on Ground Frames and Shunters' Releases

Guidance on the Safety in Railway Tunnels Technical Specification for Interoperability

Guidance on the Operation and Traffic Management Technical Specification for Interoperability

Requirements for Lighting in Railway Tunnels

Ground Frames and Shunters' Releases

Guidance on Positioning of Lineside Telephones

Positioning of Lineside Telephones

General duties of a controller of site safety (COSS)

This handbook is for those personnel who have the general duties of a controller of site safety (COSS).

Duties of the machine controller (MC) and on-track plant operator

You will need this handbook if you carry out the duties of the machine controller (MC) and on-track plant operator.

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Personnel asking for trains to be stopped form

This form is used by signallers to record the details when personnel ask for a line to be blocked for their own protection when going on or near the…

Level crossings - signallers' regulations

You will need this module if you carry out the duties of a signaller in an area where there is a level crossing.

Preparation and movement of trains

You will need this module if you carry out the duties of a driver, guard, shunter, signaller, train preparer or competent person.

General duties and track safety for track workers

This handbook is for those personnel who need to go on the operational railway to carry out their duties, with the exception of a train driver, guard,…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

IWA, COSS or PC blocking a line

You will need this handbook if you carry out the duties of a IWA, COSS or PC blocking a line.

Possession of a running line for engineering work

You will need this module if you carry out the duties of a driver or signaller.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Code of Practice for the Storage and Recommissioning of OTP

This Code of Practice is to define the actions that should be taken for any OTP designated as Out of Service recommending a minimum level of…

Code of Practice for Piling using OTP

Code of Practice for OTM Driver Communication Review Group (CRG)

This Code of Practice supports the national strategy for improved Safety Critical Communications.  It provides a collaborative process (M&EE Group OTM…

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…

Code of Practice for Safe use of Quick Hitches

This Code of Practice identifies the types of quick hitches as categorised by the HSE and details the safety issues and provides safe systems of work…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Plant Any Line Open (ALO) Working

This Code of Practice provides guidance on how to safely manage Plant Any Line Open (ALO) working.

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).