Standards Catalogue

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Overrun Risk Evaluation and Assessment

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority. 

Index for Lineside Signs

Resistance of Railway Vehicles to Roll-Over in Gales

This document mandates requirements to be applied to railway vehicles so that they can operate under gale conditions in Great Britain. It applies to…

Guidance on the Locomotives and Passenger Rolling Stock TSI

Guidance Note on the Provision of Lineside Telephones

This document provides guidance to Infrastructure Managers on criteria that may be considered when deciding on the provision of lineside telephones…

Infrastructure Based Train Detection Systems

This document sets out requirements and guidance on infrastructure based train detection systems.

GB Requirements for Platform Height, Platform Offset and Platform Width

Interface between Station Platforms, Track, Trains and Buffer Stops

Permissible Track Forces and Resistance to Derailment and Roll-Over of Railway Vehicles

Guidance Note on Vehicle Static Testing

Electromagnetic Compatibility of Train Detection Infrastructure with Rail Vehicles

RIS-0725-CCS Iss 1.1 is a rail industry standard correction release on immunity levels of infrastructure-based train detection systems, to provide…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

IWA, COSS or PC blocking a line

You will need this handbook if you carry out the duties of a IWA, COSS or PC blocking a line.

Duties of the machine controller (MC) and on-track plant operator

You will need this handbook if you carry out the duties of the machine controller (MC) and on-track plant operator.

General duties of an individual working alone (IWA)

This handbook is for those personnel with general duties of an individual working alone (IWA).

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Working of on-track machines (OTM)

You will need this module if you carry out the duties of a driver of an on-track machine, an operator of an on-track machine or a signaller.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

Preparation and movement of trains

You will need this module if you carry out the duties of a driver, guard, shunter, signaller, train preparer or competent person.

General duties and track safety for track workers

This handbook is for those personnel who need to go on the operational railway to carry out their duties, with the exception of a train driver, guard,…

General duties of a controller of site safety (COSS)

This handbook is for those personnel who have the general duties of a controller of site safety (COSS).

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Audit Protocol for Supply of Possession-only Rail Vehicles with and without Operators

Code of Practice for On and Off Tracking of Road-rail Vehicles

Code of Practice for Safety Related Defect Reporting & Performance Monitoring for Hired in RRVs and RMMMs

Code of Practice for Handling Serviceable Rail with Road-Rail Excavator Cranes in Rail Mode Including Thimbling

Checklist for application Note 6 (Maintenance)

Code of Practice for Railway Safety Critical Maintenance Elements of Small Plant and Equipment

Application Note 6 - Maintenance

Code of Practice for Basic Training, Assessment and Post-qualifying Monitoring - OTM Drivers

Code of Practice for OTM Traction

Code of Practice for OTM Driver - Task Analysis