Standards Catalogue

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document defines the requirements for the DC conductor rail energy system and the interfaces to rolling stock operating over the DC electrified…

Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document defines the interface requirements to the DC conductor rail energy system for all rolling stock operating over the DC electrified…

Guidance on DC Conductor Rail Energy Subsystem and Interfaces to Rolling Stock Subsystem

This document gives guidance on interpreting the requirements of Railway Group Standard GLRT1212 Iss 1 DC Conductor Rail Energy Subsystem and…

Guidance on Rolling Stock Subsystem and Interfaces to DC Conductor Rail Energy Subsystem

This document gives guidance on interpreting the requirements of Railway Group Standard GMRT2113 Iss 1 Rolling Stock Subsystem and Interfaces to DC…

Guidance on 'Signals, Railway Track, Explosive' (also known as 'Detonators')

This guidance is intended to assist infrastructure managers and railway undertakings in understanding their responsibilities in relation to…

Defective On-Train Equipment

Guidance on Defective on-Train Equipment

Lineside Signal Spacing and Speed Signage

Guidance on Lineside Signal Spacing and Speed Signage

Rail Industry Standard for Track to Train RFID compatibility

General duties of a controller of site safety (COSS)

This handbook is for those personnel who have the general duties of a controller of site safety (COSS).

Duties of the machine controller (MC) and on-track plant operator

You will need this handbook if you carry out the duties of the machine controller (MC) and on-track plant operator.

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

Personnel asking for trains to be stopped form

This form is used by signallers to record the details when personnel ask for a line to be blocked for their own protection when going on or near the…

Level crossings - signallers' regulations

You will need this module if you carry out the duties of a signaller in an area where there is a level crossing.

Preparation and movement of trains

You will need this module if you carry out the duties of a driver, guard, shunter, signaller, train preparer or competent person.

General duties and track safety for track workers

This handbook is for those personnel who need to go on the operational railway to carry out their duties, with the exception of a train driver, guard,…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

IWA, COSS or PC blocking a line

You will need this handbook if you carry out the duties of a IWA, COSS or PC blocking a line.

Possession of a running line for engineering work

You will need this module if you carry out the duties of a driver or signaller.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Audit Protocol for Supply of Possession-only Rail Vehicles with and without Operators

Code of Practice for On and Off Tracking of Road-rail Vehicles

Code of Practice for Safety Related Defect Reporting & Performance Monitoring for Hired in RRVs and RMMMs

Code of Practice for Handling Serviceable Rail with Road-Rail Excavator Cranes in Rail Mode Including Thimbling

Checklist for application Note 6 (Maintenance)

Code of Practice for Railway Safety Critical Maintenance Elements of Small Plant and Equipment

Application Note 6 - Maintenance

Code of Practice for Basic Training, Assessment and Post-qualifying Monitoring - OTM Drivers

Code of Practice for OTM Traction

Code of Practice for OTM Driver - Task Analysis