Standards Catalogue

Traction batteries in rolling stock depots

The technical note aims to inform the industry on handling, storage and the safe maintenance practices of lithium-ion traction battery packs within…

Fire compartmentation and Li-ion traction batteries

The technical note aims to inform the industry on adequate design considerations for crashworthiness and fire barrier considerations to minimise the…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Guidance on Lineside Signal Spacing and Speed Signage

Rail Industry Standard for Track to Train RFID compatibility

Train Operation - Exceptional Load Documentation

Requirements for the Weekly Operating Notice, Periodical Operating Notice and Sectional Appendix

Guidance on Low Adhesion between the Wheel and the Rail - Managing the Risk

Lineside Signs

Guidance on Lineside Signs

Index for Lineside Signs

Rail Industry Standard for Wheelsets Handling and Storage

Rail Industry Standard Freight Technical Committee Audit Protocol

This document is of specific application to wagon Entities in Charge of Maintenance (ECMs) embraced by Commission Regulation (EU) number 445/2011 and…

Changes to National Operations Publications for March 2024

Changes to National Operations Publications for December 2023

Train Driver Manual

Signaller and Signalling Technician Manual

Possession Workers Manual

Master manual

Rule Book Briefing Leaflet

Possession of a running line for engineering work

Train stopped by train failure

You will need this module if you carry out the duties of a driver or signaller.

Preparation and working of freight trains

You will need this module if you carry out the duties of the following in relation to freight trains: train driver, guard, shunter, train preparer.

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Code of Practice for Loose Materials on OTMs

This Code of Practice details the action to be taken to safely store loose material on an on-track machine.

Code of Practice for Brake Testing of RRVs

Code of Practice for Planning for the Use of Mobile Operated Plant

Code of Practice for Planning for the Use of Non-rail Mounted Plant

Code of Practice for Hydraulic Hose In-use Repair

Code of Practice for Safe use of Quick Hitches

Code of Practice for Defect Reporting for OTP, Plant and Equipment

Code of Practice for Control of Mobile Communication Equipment Use in Driving Cabs

Code of Practice for OTM Route Conducting Policy

Code of Practice for Planning and Executing Lifting Operations

This Code of Practice concerns all lifting operations involving rail cranes, twin jib cranes, road-rail excavator cranes, and vehicle mounted knuckle…