Standards Catalogue

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Master Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Infrastructure Based Train Detection Interface Requirements

Application of Standard Vehicle Gauges

Train front-end visibility requirements and safe integration

This technical note clarifies the application of standards and legislation for front-end visibility and safe integration of rolling stock within the…

Process for Adding, Removing or Modifying Lettered Differential Permissible Speeds

This document sets out requirements and guidance to support the process of adding, removing or modifying a Lettered Differential Permissible Speed…

Route Level Assessment of Technical Compatibility between Vehicles and Infrastructure

This document sets out requirements and responsibilities for the assessment of technical compatibility at route level for vehicles and infrastructure.

Passenger Train Dispatch and Platform Safety Measures

This document sets out requirements and guidance for the development, review and implementation of passenger train dispatch processes and measures to…

Trespass Risk Assessment

This document provides a common framework for trespass risk assessments, developed from the outputs of RSSB research project T1183 - Good practice…

Defective On-Train Equipment

This document sets out requirements to be applied when on-train equipment becomes defective and provides guidance to assist the railway undertakings…

Client Safety Assurance of High Integrity Software-Based Systems for Railway Applications

This document sets out requirements for safety assurance of high integrity software-based systems for railway applications.

Interface between Station Platforms, Track, Trains and Buffer Stops

RIS-7016-INS brings together requirements to provide an integrated and consistent set covering station platforms, the interface between platforms,…

T7 - Safe systems of work when walking or working on or near the line

Rule Book module issue history

TW1 - Preparation and movement of trains: General

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

Signal passed at danger (SPAD)

Activation of TPWS other than a signal passed at danger (SPAD)

Briefing leaflet

Train warning systems (AWS and TPWS) and reporting signalling failures and irregularities

Rule Book index

TS1 - Signalling general instructions

Directional arrows

This document provides design details for sign AJ10 - Directional arrows.  

Advance lower pantograph (temporary power changeover)

This document provides design details for sign AJ12 - Advance lower pantograph (temporary power changeover).

Warning of Traction System Changeover

This document provides design details for sign AJ04 - Warning of traction system changeover.  

Indication of route

This document provides design details for sign AJ11 - Indication of route.

Lower pantograph (temporary power changeover)

This document provides design details for sign AJ13 - Lower pantograph (temporary power changeover).  

Changeover to or from self-powered

This document provides design details for sign AJ08 - Changeover to or from self-powered.

Changeover to Overhead Electric Traction

This document provides design details for sign AJ07 - Changeover to Overhead Electric Traction.

Do not raise pantograph

This document provides design details for sign AJ09 - Do not raise pantograph.  

Do not raise pantograph (temporary power changeover)

This document provides design details for sign AJ15 – Do not raise pantograph (temporary power changeover).

Lower Pantograph

This document provides design details for sign AJ03 - Lower pantograph

Code of Practice for Load Lifting Points on Road Rail Excavator Cranes

Code of Practice for Planning and Executing Lifting Operations

MEWP Planning Poster

Yellow Book and Taking Safe Decisions

Code of Practice for Trailers and Attachments with RRVs and RMMMs

Lifting of Trailers Poster

Code of Practice for Rail Mounted Manually Propelled Equipment

Technical Advice Note for Labelling of RRV Excavator Cranes for Lifting Operations

Code of Practice for Competence of Control Centre Staff

Technical Advice Note for Quick Hitches