Standards Catalogue

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

AWS Relays

Isolation and Earthing of Overhead Line Equipment

AWS Specification for Static Voltage Converter

Specification for Electro-Hydraulic Power Equipment for Point Operation

Relay Unit and Junction Box

Shunting Signals

Approach Locking

50Hz Single Phase AC Electrification, Immunisation of Signalling and Telecommunications Systems Against Electrical Interference.

AWS Electric Horn

AWS Reset Plunger

Section L - Level crossings

Section J - Shunting

Section P(ii) - Working of single and bi-directional lines by pilotman

Section E(i) - Failure, maintenance and renewal of signalling equipment

Section E(ii) - Working of trains during failure, maintenance and renewal of signalling equipment

Section G - Your duties when working at a passenger station

Section P(i) - Working of single lines

Section Q - On-track Plant

Section H (iv) - Working of the automatic brake on locomotive hauled and multiple unit trains

Section Z(i) - A.C. electrified lines

Commencement of special AWS working

This document provides design details for AA03 sign - Commencement of special AWS.

Termination of special AWS working

This document provides design details for AA04 sign - Termination of special AWS working.

Permanently installed AWS cancelling indicator

This document provides design details for AA05 sign - Permanently installed AWS cancelling indicator

Warning of the start of cab-signalling

This document provides design details for AB01 sign - Warning of the start of cab-signalling.

Indication of start of cab-signalling

This document provides design details for AB02 sign - Indication of start of cab-signalling.

Indication of end of cab-signalling

This document provides design details for AB03 sign - Indication of end of cab-signalling.

TVM block marker

This document provides design details for AB04 sign - TVM block marker.

Cab signalling shunt entry board

This document provides design details for AB05 sign - Cab signalling shunt entry board.

Radio electronic token block: loop clear marker

This document provides design details for AB06 sign - Radio electronic token block: loop clear marker.

Start / end of cab signalling directional arrows

This document provides design details for AB07 sign - Start / end of cab signalling directional arrows.

Use of Mobile Devices

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by using a mobile phone whilst driving a train. Further…

Code of Practice for Defective OTP Safety Critical Equipment

This Code of Practice details what actions should be undertake when On-Track Plant (OTP) is discovered to have defective safety critical equipment…

Inspection of Demountable MEWP and Lifting Equipment

This Code of Practice details the arrangements for inspecting MEWPs and lifting equipment in accordance with legislation when attaching to the base…

MEWP Planning

This poster is provided by the M&EE Networking Group to remind industry that all MEWP activities must be properly planned and site specific - even if…

Code of Practice for Route Conductor Assurance

This Code of Practice is to assist Duty Holders to identify, assess and control risks which may arise from the activities of supplying and engaging in…

OTP Tandem Lifting and Indication

This poster is provided by the M&EE Networking Group to remind planners to use the latest planning information/tools provided by the RCI suppliers for…

Lifting Accessories Misuse

This poster is provided by the M&EE Networking Group to remind planners and users of plant about the dangers associated with the misuse of lifting…

Lift and Carry Using OTP In Road Mode

This poster is provided by the M&EE Networking Group to remind the operator of road-rail excavator cranes of the need for caution because lift and…

RCI Motion Cut

This poster is provided by the M&EE Networking Group to remind the industry that the RCI function automatically stops further movement of the machine…

Using Outriggers / Stabilisers on Plant

This poster is provided by the M&EE Networking Group to reminder planners and users of plant with outriggers that stability can be seriously affected…