Standards Catalogue

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

Time and Date in Railway Systems

This document sets out requirements and guidance for the use, interpretation and formatting of time and date information in railway systems.

Route Availability

This technical note describes the standards associated with rail vehicle route availability (RA) numbers, and provides guidance on the application of…

Route Availability Number for Assessment of Compatibility between Rail Vehicles and Underline Bridges

This document sets out requirements for the derivation and use of the Route Availability number for the assessment of compatibility between the static…

Rail Industry Standard for Driving Cabs

This document sets out supplementary requirements for the design, layout and operational equipment in driving cabs of rail vehicles to the Locomotive…

Rail Industry Guidance Note on Vehicle Static Testing

This document gives guidance on meeting the requirements of GMRT2141 'Permissible Track Forces and Resistance to Derailment and Roll-Over of Railway…

Application of the WAG NTSN and NOI NTSN to the Design of Freight Wagons

This document provides guidance on the application of the Rolling Stock - Freight Wagon National Technical Specification Notice (WAG NTSN) and on the…

Route Level Assessment of Technical Compatibility between Rail Vehicles and Underline Bridges

This document sets out requirements and guidance for the assessment of compatibility between rail vehicles and underline bridges at route level on the…

Rail Industry Standard for NDT Processes on Rail Vehicles

This document sets out requirements and gives guidance for processes and the certification of operatives, equipment, and facilities used to undertake…

Guidance on evaluating excessive dynamic effects in underline bridges

This document provides guidance on evaluating and managing the risk of excessive dynamic effects in underline bridges resulting from the operating…

Permissible Track Forces and Resistance to Derailment and Roll-Over of Railway Vehicles

This document sets out requirements for railway vehicles regarding permissible track forces, derailment resistance and resistance to roll-over due to…

Section U(ii) - Emergency speed restrictions

Working Manual for Rail Staff - Freight Train Operations - Preparation of Freight Trains

Rule Book Section Z (Part i) - AC electrified lines

Section J - Shunting

Section T(ii) - Protection of engineering work when the engineer takes possession of the line

Working Manual for Rail Staff (Pink Pages), Handling and Carriage of Dangerous Goods

Working Manual for Rail Staff - Freight Train Operations

Working Manual for Rail Staff- Freight Train Operations - Freight Trains - Cripple Instructions""

Working Manual for Rail Staff - Freight Train Operations - Table C1 - Route Availability (RA)

Working Manual for Rail Staff - Freight Train Operations - Table E1 - Maximum Loads Permitted with Specific Brake Forces

Ground position light signal identification plate

This document provides design details for AC09 sign - Ground position light signal identification plate.

ETCS identification plate

This document provides design details for AC11 sign - ETCS identification plate.

GSM-R alias plate

This document provides design details for AC12 sign - GSM-R alias plate.

Permissible speed indicators (km/h)

This document provides design details for AD01k sign - Permissible speed indicators (km/h).

Permissible speed indicators (mph)

This document provides design details for AD01m sign - Permissible speed indicators (mph).

Permissible speed indicators (km/h) for limited clearance

This document provides design details for AD02k sign - Permissible speed indicators (km/h) for limited clearance.

Termination of AWS gap

This document provides design details for AA02 sign - Termination of AWS gap.

Commencement of AWS gap

This document provides design details for AA01 sign - Commencement of AWS gap.

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

No refuges sign

Code of Practice for Plant Any Line Open (ALO) Working

This Code of Practice provides guidance on how to safely manage Plant Any Line Open (ALO) working.

Code of Practice for Hydraulic Hose In-use Repair

This Code of Practice details the action to be taken following the failure of  hydraulic hose(s) on an on-track machine (OTM).

Code of Practice for Safe use of Quick Hitches

This Code of Practice identifies the types of quick hitches as categorised by the HSE and details the safety issues and provides safe systems of work…

Code of Practice for OTM Ready to Run Card

This Code of Practice provides guidance on the action to be taken and design of card to show that an applicable on-track machine (OTM) is ready to be…

Code of Practice for Management of Siding Safety Surveys

This Code of Practiceprovides guidance to enable the effective setting up of a safe system of work within all sidings allocated for stabling and…

Seasonal Operating of OTP

This poster is provided by the M&EE Networking Group to remind operators when adhesion is low, keep it slow.

OTP Mechanical Movement Limiting Device

This poster is provided by the M&EE Networking Group to remind the industry about the use of mechanical movement limiting device and the restrictions…

Code of Practice for Route Knowledge within Possessions

This Code of Practice contains guidance and generic good practice for the management of route knowledge for train drivers within a possession. It sets…

Rail Handling – Rail Turner Awareness

This poster is provided by the M&EE Networking Group to remind industry about the competence requirements necessary for the Crane Controller and…

Code of Practice for Brake Testing of OTP

This Code of Practice details the testing of the braking system of OTP excluding Trolleys during operations and routine maintenance examination…