Standards Catalogue

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

Communication of urgent operating advice

This standard sets out requirements, rationale and guidance for reporting and communicating urgent operating safety information.

Reporting of adverse events

This technical note will help industry to understand the reporting systems for safety related issues provided by the Rail Safety and Standards Board…

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Management of Safety-Related Rail Vehicle Defects

This document defines requirements for recording, analysing and reporting safety-related defects, faults and failures on rail vehicles, plant and…

Urgent High-Risk Defect Report Form

In the event that the NIR-Online system is unavailable, details of urgent high-risk defects, faults and failures shall be shared by completing and…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Lineside Operational Signs - Product Requirements

This document sets of the requirements of lineside operational signs that support technical compatibility with rail vehicle exterior lighting and…

Briefing leaflet

G1 - General safety responsibilities

SS2 - Shunting

TW1 - Preparation and movement of trains. General

TW1 Addendum - Preparation and movement of Trains. General. Additional instructions protecting personnel when servicing and repairing vehicles

AC1 - AC Electrified lines: Part A Dangers of the system, description of equipment and communications. Part B Emergency procedures

TW7 - Wrong-direction movements

TW8 - Level crossings

TW2 - Preparation and movement of multiple-unit passenger trains

TW3 - Preparation and movement of locomotive-hauled trains

Temporary Speed Restriction Repeater Warning Board

This document provides design details for AF03 sign - Temporary speed restriction repeater warning board.

Signs at access points - information

This document provides design details for BC01 sign - Signs at access points - information.

Danger from passing trains

This document provides design details for CA01 sign - Danger from passing trains.

Danger - No unauthorised access

This document provides design details for CA03 sign - Danger - no authorised access.

Supplementary sign at crossings where trains pass in excess of 100 mph

This document provides design details for CC01 sign - Supplementary sign at crossings where trains pass in excess of 100 mph.

Warning sign for a non-vehicular crossing (PCR diagram 101)

This document provides design details for CC03 sign - Warning sign for a non-vehicular crossing (PCR diagram 101).

Private level crossings: operating instructions for barrier (PCR diagram 104)

This document provides design details for CC06 sign - Private level crossings: operating instructions for barrier (PCR diagram 104).

Signs for use with miniature red / green lights with and without a telephone (PCR diagrams 107 and 108)

This document provides design details for CC08 sign - Signs for use with miniature red / green lights with and without a telephone (PCR diagrams 107…

Instructions for Use at a Crossing with Miniature Stop Lights and User-Operated Barriers (PCR diagram 110)

This document provides design details for CC10 sign - Instructions for Use at a Crossing with Miniature Stop Lights and User-Operated Barriers (PCR…

Reminder at a crossing with user-operated barriers (PCR diagram 112)

This document provides design details for CC12 sign - Reminder at a crossing with user-operated barriers (PCR diagram 112).

Safety within depot yards and sidings

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by train movements within depot yards and sidings.

Code of Practice for Loading of OTP

This Code of Practice gives guidance on the arrangements for loading and securing of typical loads associated with all on-track plant (OTP) whilst on…

Code of Practice for Rail Mounted Manually Propelled Equipment

This Code of Practice details the use and some aspects of the design and maintenance of rail mounted manually propelled equipment (trolleys and…

Objects left on the line

This poster is provided by the M&EE Networking Group to remind industry of the measures to take to reduce the hazard of objects being left on the…

Points run through

This poster is provided by the M&EE Networking Group to remind industry that points run throughs only occur when the rules are not followed.

Code of Practice Planning for the Use of Mobile Operated Plant

This Code of Practice details minimum requirements for planning for the use of mobile operated plant excluding lifting operations. It applies to…

Reporting track defects

This poster is provided by the M&EE Networking Group to remind industry that any track defects which could affect plant and equipment safely…

Seat belts

This poster is provided by the M&EE Networking Group to remind industry that wearing the seat belt could save your life.

Code of Practice for OTM Route Conducting Policy

This Code of Practice contains requirements and guidance for OTM driver’s route conducting or being conducted. Also to assist in the improvement of…

Code of Practice for Control of Mobile Communication Equipment use in Driving Cabs

This Code of Practice contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains. It sets…