Standards Catalogue

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

Overlaps

Procedure for the Special Action Required for A.C Electrified Lines in those Jointless Track Circuit Areas Listed in Appendix A

Specification for Additional Earthing and Bonding Requirements for A.C Electrified Lines in those Joinless Track Circuit Areas Listed in Appendix A

Switch and Crossing Maintenance

Approach Locking Relay Circuits: ALSR

Single Button Signal Control Via TDM

Occupational Dermatitis

Alcohol

High Visibility Clothing

Security of Portable Plant, Tools and Materials at the Lineside

Section L - Level crossings

Section J - Shunting

Section P(ii) - Working of single and bi-directional lines by pilotman

Section E(i) - Failure, maintenance and renewal of signalling equipment

Section E(ii) - Working of trains during failure, maintenance and renewal of signalling equipment

Section G - Your duties when working at a passenger station

Section P(i) - Working of single lines

Section Q - On-track Plant

Section H (iv) - Working of the automatic brake on locomotive hauled and multiple unit trains

Section Z(i) - A.C. electrified lines

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

ETCS Location Marker

This document provides design details for sign AB10 - ETCS location marker.

Permissible speed acceleration indicator

This document provides design details for sign AD06 - Permissible speed acceleration indicator.

Temporary speed restriction termination - Acceleration indicator

This document provides design details for sign AF09 - Temporary speed restriction termination - Acceleration indicator.

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

This document provides design details for CC16 sign - Supplementary sign where crossing is used for animal traffic (PCR diagram 118).

Car Stop Markers on Station Platforms

Car Stop Markers on Station Platforms

FTAP Flexible Train Arrival Point

A set of four signs to direct engineering trains or on-track machine to locate the required stopping point within a possession or protection zone when…

Car Stop Markers on Station Platforms

No refuges sign

This document provides design details for BA05 sign - No refuges sign.

End of Emergency special Working

This document provides design details for sign AK215 - End of Emergency Special Working

Safety within depot yards and sidings

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by train movements within depot yards and sidings.

Code of Practice for Loading of OTP

This Code of Practice gives guidance on the arrangements for loading and securing of typical loads associated with all on-track plant (OTP) whilst on…

Code of Practice for Rail Mounted Manually Propelled Equipment

This Code of Practice details the use and some aspects of the design and maintenance of rail mounted manually propelled equipment (trolleys and…

Objects left on the line

This poster is provided by the M&EE Networking Group to remind industry of the measures to take to reduce the hazard of objects being left on the…

Points run through

This poster is provided by the M&EE Networking Group to remind industry that points run throughs only occur when the rules are not followed.

Code of Practice Planning for the Use of Mobile Operated Plant

This Code of Practice details minimum requirements for planning for the use of mobile operated plant excluding lifting operations. It applies to…

Reporting track defects

This poster is provided by the M&EE Networking Group to remind industry that any track defects which could affect plant and equipment safely…

Seat belts

This poster is provided by the M&EE Networking Group to remind industry that wearing the seat belt could save your life.

Code of Practice for OTM Route Conducting Policy

This Code of Practice contains requirements and guidance for OTM driver’s route conducting or being conducted. Also to assist in the improvement of…

Code of Practice for Control of Mobile Communication Equipment use in Driving Cabs

This Code of Practice contains requirements and guidance for the control of mobile communication equipment use in the driving cabs of trains. It sets…