Standards Catalogue

Guidance on wagon maintenance related to recommendations from RAIB reports

This technical note documents findings from all reports, bulletins, and safety digests, published by RAIB, where maintenance of rail wagons has been…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

Axle Bearing Condition Monitoring

This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.

Guidance on Operational Railway Safety Awareness

Engineering change (software and firmware)

This technical note provides signposts to existing standards and good practice in engineering change management relating to software and…

Freight coupler loads

This technical note will help industry assess the ability of a locomotive to haul loads over a route. It focuses on coupler load capacity and…

Fire-related properties of batteries

This technical note sets out options for improving fire performance of batteries in use on GB mainline rolling stock, and the factors which may need…

Railway Wheelsets

This document sets out requirements for the design, manufacture and maintenance of wheelsets and their components. Access the tread profile…

Managing Train Accident Risk Arising from Train Operations

This document sets out requirements and guidance for the management of train accident risk arising from train operations as part of the GB rail…

Rail Industry Standard for Wheelsets

This document supports GMRT2466 and sets out requirements for the design, manufacture and maintenance of wheelsets and their components.

Requirements for the Position of Infrastructure and for Defining and Maintaining Clearances

This document sets out requirements for positioning infrastructure and maintaining the position of track relative to infrastructure to achieve gauge…

Corrosion of rail vehicles

This technical note will help those maintaining or repairing rolling stock in detecting, and if appropriate, remedying corrosion. It covers current…

Section M(ii) - Train stopped by failure and provision of assistance

Section L - Level crossings

Section J - Shunting

Section P(ii) - Working of single and bi-directional lines by pilotman

Section E(i) - Failure, maintenance and renewal of signalling equipment

Section E(ii) - Working of trains during failure, maintenance and renewal of signalling equipment

Section G - Your duties when working at a passenger station

Section P(i) - Working of single lines

Section Q - On-track Plant

Section H (iv) - Working of the automatic brake on locomotive hauled and multiple unit trains

Instructions to non-vehicular traffic at a crossing with miniature stop lights (PCR diagram 114)

This document provides design details for CC14 sign - Instructions to non-vehicular traffic at a crossing with miniature stop lights (PCR diagram…

Bridge strike information

This document provides design details for CD02 sign - Bridge strike information.

White diamond

This document provides design details for DA02 sign - White diamond.

Signal post telephone

This document provides design details for DB01 sign - Signal post telephone.

Lineside telephone

This document provides design details for DB03 sign - Lineside telephone.

Telephone for routine use by railway staff

This document provides design details for DB06 sign - Telephone for routine use by railway staff.

Cab secure radio channel change marker

This document provides design details for DC02 sign - Cab secure radio channel change marker.

RETB channel change marker

This document provides design details for DC04 sign - RETB channel change marker.

Entering and leaving an IVRS zone marker

This document provides design details for DC06 sign - Entering and leaving an IVRS zone marker.

GSM-R signal box phone number sign

This document provides design details for DD02 sign - GSM-R signal box phone number.

Code of Practice for Plant Modules on Rail Wagons and Trailers

This Code of Practice identifies the process to be undertaken when plant modules are attached to rail wagons or trailers. This covers the use of plant…

Code of Practice for the Storage and Recommissioning of OTP

This Code of Practice is to define the actions that should be taken for any OTP designated as Out of Service recommending a minimum level of…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Code of Practice for OTM Driver Communication Review Group (CRG)

This Code of Practice supports the national strategy for improved Safety Critical Communications.  It provides a collaborative process (M&EE Group OTM…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…