Standards Catalogue

Guidance on wagon maintenance related to recommendations from RAIB reports

This technical note documents findings from all reports, bulletins, and safety digests, published by RAIB, where maintenance of rail wagons has been…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

Code of Practice for the Registration, Inspection & Statutory Examination of Closed Circuit Television Camera Hoist Mechanisms

Registration, Inspection and Statutory Examination of CCTV Camera Column Hoist Mechanism

AWS Relays

Isolation and Earthing of Overhead Line Equipment

AWS Specification for Static Voltage Converter

Specification for Electro-Hydraulic Power Equipment for Point Operation

Relay Unit and Junction Box

Shunting Signals

Approach Locking

50Hz Single Phase AC Electrification, Immunisation of Signalling and Telecommunications Systems Against Electrical Interference.

Section Z(i) - A.C. electrified lines

Form for Reporting a Signal/AWS/TPWS/TVM Failure or Irregularity

Section H(v) - Working of on-track machines - Normal arrangements

Form for Signal Passed at Danger (SPAD) or Activation of TPWS

Section Z(i) - A.C. Electrified Lines - Amendment 2

Release of Signalling Controls - Form referred to in Rule Book Section E

Section R - Loading or unloading rail vehicles during engineering work

Section E - Introduction to failure, maintenance and renewal of signalling equipment

Section H(iii) - Working of doors on passenger, parcels and empty coaching stock trains

Overhead Line Permit

Ground position light signal identification plate

This document provides design details for AC09 sign - Ground position light signal identification plate.

ETCS identification plate

This document provides design details for AC11 sign - ETCS identification plate.

GSM-R alias plate

This document provides design details for AC12 sign - GSM-R alias plate.

Permissible speed indicators (km/h)

This document provides design details for AD01k sign - Permissible speed indicators (km/h).

Permissible speed indicators (mph)

This document provides design details for AD01m sign - Permissible speed indicators (mph).

Permissible speed indicators (km/h) for limited clearance

This document provides design details for AD02k sign - Permissible speed indicators (km/h) for limited clearance.

Termination of AWS gap

This document provides design details for AA02 sign - Termination of AWS gap.

Commencement of AWS gap

This document provides design details for AA01 sign - Commencement of AWS gap.

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

No refuges sign

Code of Practice for Plant Modules on Rail Wagons and Trailers

This Code of Practice identifies the process to be undertaken when plant modules are attached to rail wagons or trailers. This covers the use of plant…

Code of Practice for the Storage and Recommissioning of OTP

This Code of Practice is to define the actions that should be taken for any OTP designated as Out of Service recommending a minimum level of…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Code of Practice for OTM Driver Communication Review Group (CRG)

This Code of Practice supports the national strategy for improved Safety Critical Communications.  It provides a collaborative process (M&EE Group OTM…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…