Standards Catalogue

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

Rolling stock – cyber security essentials

This technical note will help industry to identify cyber security control measures, which may be put in place when designing a new component or…

Driver-controlled operation and driver-only operation on-train camera monitoring systems

This technical note will help industry in the design and operation of on-train camera monitoring systems. It provides guidance on the applicable…

Engineering Requirements for Steam Locomotives and other Heritage Rail Vehicles

This document sets out the engineering requirements for heritage rail vehicles (including steam locomotives) to support use when operating in heritage…

Track to Train RFID Compatibility

This document sets out requirements for RFID compatibility between train and track, including management of application codes.  

Operational Requirements for GSM-R Radio

This document contains the necessary requirements and guidance for the development of contingency plans to manage failures of the GSM-R voice system.…

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

Signalling layout and signal aspect sequence requirements

This document sets out requirements for the lineside signalling system to be compatible with train operations and guidance on their application.

On-Track Plant, Trolleys and Associated Equipment

Examination and repair of structural corrosion in Mark 1 type rolling stock

This technical note will help those maintaining or repairing Mark 1 type rolling stock to detect and remedy corrosion on this type of vehicle. This…

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

TS3 - Absolute block regulations

Managing accidents

P1 - Single line working

Signals and indicators controlling train movements

OTP - On-track plant

P2 - Working single and bi-directional lines by pilotman

Section T(i) - Protection of persons carrying out activities on the line that do not affect the safety of trains

Amendments & alterations master Rule Book June 2003

Section B(ii) - Your safety when you are walking in a group or working on or near the line

Section B(iii) - Your general duties when you are on or near the line

ETCS block marker passable plate

This document provides design details for AB09 sign - ETCS block marker passable plate.

Controlled signal identification plate

This document provides design details for AC01 sign - Controlled signal identification plate.

Distant signal sign and identification plate

This document provides design details for AC02 sign - Distant signal sign and identification plate.

Automatic signal sign and identification plate

This document provides design details for AC03 sign - Automatic signal sign and identification plate.

Semi-automatic signal sign and identification plate

This document provides design details for AC04 sign - Semi-automatic signal sign and identification plate.

Intermediate block home signal sign and identification plate

This document provides design details for AC05 sign - Intermediate block home signal sign and identification plate.

CSR alias plate

This document provides design details for AC06 sign - CSR alias plate.

SPAD indicator sign and identification plate

This document provides design details for AC07 sign - SPAD indicator sign and identification plate.

Points indicator sign

This document provides design details for AC08 sign - Points indicator sign.

Points identification plates

This document provides design details for AC10 sign - Points identification plates.

Use of Mobile Devices

This poster is provided by the M&EE Networking Group to remind industry of the risks posed by using a mobile phone whilst driving a train. Further…

Code of Practice for Defective OTP Safety Critical Equipment

This Code of Practice details what actions should be undertake when On-Track Plant (OTP) is discovered to have defective safety critical equipment…

Inspection of Demountable MEWP and Lifting Equipment

This Code of Practice details the arrangements for inspecting MEWPs and lifting equipment in accordance with legislation when attaching to the base…

MEWP Planning

This poster is provided by the M&EE Networking Group to remind industry that all MEWP activities must be properly planned and site specific - even if…

Code of Practice for Route Conductor Assurance

This Code of Practice is to assist Duty Holders to identify, assess and control risks which may arise from the activities of supplying and engaging in…

OTP Tandem Lifting and Indication

This poster is provided by the M&EE Networking Group to remind planners to use the latest planning information/tools provided by the RCI suppliers for…

Lifting Accessories Misuse

This poster is provided by the M&EE Networking Group to remind planners and users of plant about the dangers associated with the misuse of lifting…

Lift and Carry Using OTP In Road Mode

This poster is provided by the M&EE Networking Group to remind the operator of road-rail excavator cranes of the need for caution because lift and…

RCI Motion Cut

This poster is provided by the M&EE Networking Group to remind the industry that the RCI function automatically stops further movement of the machine…

Using Outriggers / Stabilisers on Plant

This poster is provided by the M&EE Networking Group to reminder planners and users of plant with outriggers that stability can be seriously affected…