Standards Catalogue

Overlaps

Procedure for the Special Action Required for A.C Electrified Lines in those Jointless Track Circuit Areas Listed in Appendix A

Specification for Additional Earthing and Bonding Requirements for A.C Electrified Lines in those Joinless Track Circuit Areas Listed in Appendix A

Switch and Crossing Maintenance

Approach Locking Relay Circuits: ALSR

Single Button Signal Control Via TDM

Occupational Dermatitis

Alcohol

High Visibility Clothing

Security of Portable Plant, Tools and Materials at the Lineside

Route Availability

This technical note describes the standards associated with rail vehicle route availability (RA) numbers, and provides guidance on the application of…

Route Availability Number for Assessment of Compatibility between Rail Vehicles and Underline Bridges

This document sets out requirements for the derivation and use of the Route Availability number for the assessment of compatibility between the static…

Rail Industry Standard for Driving Cabs

This document sets out supplementary requirements for the design, layout and operational equipment in driving cabs of rail vehicles to the Locomotive…

Rail Industry Guidance Note on Vehicle Static Testing

This document gives guidance on meeting the requirements of GMRT2141 'Permissible Track Forces and Resistance to Derailment and Roll-Over of Railway…

Application of the WAG NTSN and NOI NTSN to the Design of Freight Wagons

This document provides guidance on the application of the Rolling Stock - Freight Wagon National Technical Specification Notice (WAG NTSN) and on the…

Route Level Assessment of Technical Compatibility between Rail Vehicles and Underline Bridges

This document sets out requirements and guidance for the assessment of compatibility between rail vehicles and underline bridges at route level on the…

Guidance on evaluating excessive dynamic effects in underline bridges

This document provides guidance on evaluating and managing the risk of excessive dynamic effects in underline bridges resulting from the operating…

Permissible Track Forces and Resistance to Derailment and Roll-Over of Railway Vehicles

This document sets out requirements for railway vehicles regarding permissible track forces, derailment resistance and resistance to roll-over due to…

Rail Industry Standard for NDT Processes on Rail Vehicles

This document sets out requirements and gives guidance for processes and the certification of operatives, equipment, and facilities used to undertake…

Lineside Signal and Indicator Product Design and Assessment Requirements

This document sets out requirements and guidance for the management of risk associated with trains exceeding the end of their movement authority.

Train stopped by train failure

You will need this module if you carry out the duties of a driver or signaller.

Passing a signal at danger or an end of authority (EoA) without a movement authority (MA)

You will need this module if you carry out the duties of a: driver, guard, shunter or signaller. You will also need this module if you carry out the…

Signal Passed at Danger (SPAD) or Train Trip or Unauthorised Movement

For use by signallers in cases of a SPAD being investigated.

Observing and obeying signalling indications. Train warning systems. Reporting signalling failures and irregularities

You will need this module if you carry out the duties of a driver, person controlling train movements, shunter or signaller.

Reporting a signal / AWS / TPWS / ATP / TVM failure or irregularity

For use by drivers in all cases of signal, AWS or TPWS irregularities and signallers when the following is reported: A wrong side signalling failure,…

Advice to Train Crews - Conveyance of Radioactive Flask

This form is a Network Rail maintained document and is provided as a stand-alone version of the form originally reproduced as an Appendix to GORT3407…

Activation of TPWS or ERTMS tri

This form is used by a signaller to record information obtained from drivers after the activation of TPWS, except when a signal has been passed at…

Defective or isolated vehicles and on-train equipment

You will need this module if you carry out the duties of a driver, guard, signaller or train preparer. It sets out the operational instructions to be…

General signalling regulations

You will need this module if you carry out the duties of a signaller.

Duties of the person in charge of the siding possession (PICOS)

You will need this handbook if you carry out the duties of a PICOS.

Permissible speed indicators (km/h)

This document provides design details for AD01k sign - Permissible speed indicators (km/h).

Permissible speed indicators (mph)

This document provides design details for AD01m sign - Permissible speed indicators (mph).

Permissible speed indicators (km/h) for limited clearance

This document provides design details for AD02k sign - Permissible speed indicators (km/h) for limited clearance.

Termination of AWS gap

This document provides design details for AA02 sign - Termination of AWS gap.

Commencement of AWS gap

This document provides design details for AA01 sign - Commencement of AWS gap.

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

No refuges sign

Platform Stop Markers

Temporary speed restriction repeater warning board

Code of Practice Protection of Non PTS Holders at OTM Stabling Points

This Code of Practice concerns all OTM stabling points and can be used when non PTS holders need to visit site. The document has been written to…

Code of Practice for Use and Loading of MEWPs

This Code of Practice details the use of MEWPs, particularly with processes for loads that should safely be permitted in the work platform of a MEWP.…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Code of Practice Planning for the Use of Mobile Operated Plant

Points run throughs

Code of Practice for Action to be Taken in the Event of an Accident or Incident Involving OTP

This Code of Practice details the actions to be taken, and by whom, following an accident or incident involving OTP.  It deals with the engineering…

Code of Practice for Plant Modules on Rail Wagons and Trailers

This Code of Practice identifies the process to be undertaken when plant modules are attached to rail wagons or trailers. This Code of Practice covers…

Code of Practice for Management of Points within Engineering Work Sites

This Code of Practice is to provide guidance on the arrangements for the Management of Points within Engineering Worksites for all rail borne vehicles…

Pulling Rail with Road-Rail Excavator Cranes

This Code of Practice provides good practice in the safe pulling of continuous welded rail (CWR) and to minimise the risk of damage to the CWR or…

Code of Practice for OTP Recovery

This Code of Practice details the processes required for the recovery of failed On Track Plant from the infrastructure.