Standards Catalogue

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Level crossings - drivers' instructions

You will need this module if you carry out the duties of a driver.

Wrong-direction movements

You will need this module if you carry out the duties of a driver or signaller.

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

Rolling stock – cyber security essentials

This technical note will help industry to identify cyber security control measures, which may be put in place when designing a new component or…

Driver-controlled operation and driver-only operation on-train camera monitoring systems

This technical note will help industry in the design and operation of on-train camera monitoring systems. It provides guidance on the applicable…

Engineering Requirements for Steam Locomotives and other Heritage Rail Vehicles

This document sets out the engineering requirements for heritage rail vehicles (including steam locomotives) to support use when operating in heritage…

Track to Train RFID Compatibility

This document sets out requirements for RFID compatibility between train and track, including management of application codes.  

Operational Requirements for GSM-R Radio

This document contains the necessary requirements and guidance for the development of contingency plans to manage failures of the GSM-R voice system.…

Management of Control Command and Signalling (CCS) Subsystem Failures, Faults and Defects

This document sets out the management process requirements that apply to safety related failures of control command and signalling (CCS) onboard and…

Signalling layout and signal aspect sequence requirements

This document sets out requirements for the lineside signalling system to be compatible with train operations and guidance on their application.

On-Track Plant, Trolleys and Associated Equipment

Examination and repair of structural corrosion in Mark 1 type rolling stock

This technical note will help those maintaining or repairing Mark 1 type rolling stock to detect and remedy corrosion on this type of vehicle. This…

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

Section L - Level crossings

Section J - Shunting

Section P(ii) - Working of single and bi-directional lines by pilotman

Section E(i) - Failure, maintenance and renewal of signalling equipment

Section E(ii) - Working of trains during failure, maintenance and renewal of signalling equipment

Section G - Your duties when working at a passenger station

Section P(i) - Working of single lines

Section Q - On-track Plant

Section H (iv) - Working of the automatic brake on locomotive hauled and multiple unit trains

Section Z(i) - A.C. electrified lines

Commencement of special AWS working

This document provides design details for AA03 sign - Commencement of special AWS.

Termination of special AWS working

This document provides design details for AA04 sign - Termination of special AWS working.

Permanently installed AWS cancelling indicator

This document provides design details for AA05 sign - Permanently installed AWS cancelling indicator

Warning of the start of cab-signalling

This document provides design details for AB01 sign - Warning of the start of cab-signalling.

Indication of start of cab-signalling

This document provides design details for AB02 sign - Indication of start of cab-signalling.

Indication of end of cab-signalling

This document provides design details for AB03 sign - Indication of end of cab-signalling.

TVM block marker

This document provides design details for AB04 sign - TVM block marker.

Cab signalling shunt entry board

This document provides design details for AB05 sign - Cab signalling shunt entry board.

Radio electronic token block: loop clear marker

This document provides design details for AB06 sign - Radio electronic token block: loop clear marker.

Start / end of cab signalling directional arrows

This document provides design details for AB07 sign - Start / end of cab signalling directional arrows.

Code of Practice for Competence of Control Centre Staff

Engineering Safety Management (The yellow Book) Fundamentals and Guidance

Engineering Safety Management (The Yellow Book) Guidance (Abridged for Maintainers)

Code of Practice for Operator Competency Standards for Possession Only Rail Vehicles

Code of Practice for Tandem Lifting with Two Excavator Cranes

Code of Practice for Maintenance, Operation and Testing of Track Jacks

Code of Practice for Work Restraint Anchor Points on MEWPs

Code of Practice for RRV & RMMM Machine/Crane Controller Checklists

Code of Practice for OTM Route Conductor Competence and Fitness

Code of Practice for OTM Driver Mentor Competence and Fitness