GMRT2461 Iss 1

Sanding Equipment Fitted to Multiple Units and On-Track Machines

Synopsis

This document sets out the requirements for the performance, installation and operation of sanding equipment when fitted to multiple units and on-track machines.

Summary Of Changes

Superseded by GMRT2461 Iss 2

Read full standard

Registered

Withdrawn

Railway Group Standard

Issued:: 01/08/2001
Published:: 04/08/2001
In Force:: 01/12/2001
Withdrawn:: 03/09/2016

Details

Consultation Status	Closed
Vehicle Assessment	Yes
Superseded By	GMRT2461 Iss 2
Lead Committee	Rolling Stock - RST
Supporting Committee	Control Command and Signalling - CCS; Infrastructure - INS; Plant - PLT
Briefing Notes	01 BN19; 16 BN07
Impact Assessments Registered	01 IA04; 16 IA06
Amendments Registered	2461 Iss 1 AM001
Deviations Registered	04-204-DGN Dynamic Tampers 06-222-DGN Sanding equipment 07-100-DGN Sanding equipment 07-119-DGN Class 450/444 Traction Sand Deposition Rate 09-065-TNC Sanding equipment fitted to multiple units and on-track machines 09-097-TNC Sanding Equipment Fitted to Multiple Units and on- track Machines - Extension of scope to 07/214/TNC 09-286-DGN Exclusion From the Requirement to Fit Sanders to DR73116, DR73117 & DR73118. 08-121-TNC Sanding Equipment Fitted to Multiple Units and on- track Machines - Extension of scope to 07/214/TNC 08-030-TNC Sanding equipment fitted to multiple units and on-track machines 07-214-TNC Sanding Equipment Fitted to Multiple Units and on-track Machines – extension of scope to 06/192/TNC. 07-105-TNC Fitting of Sanding Equipment to Vehicles/Units not covered by Group Standard GMRT2461 06-225-TNC Sanding equipment 06-192-TNC Sanding Equipment Fitted to Multiple Units and on- track Machines – extension of scope to 06/192/TNC. 06-152-TNC Sand deposition rate 10-047-TNC Sanding equipment fitted to multiple units and on-track machines 10-082-DGN Sanding Equipment Fitted to Multiple Units 10-083-TNC Sanding Equipment Fitted to Multiple Units 11-055-TNC Class 156 sanding in brake step 2. 11-054-DGN Class 156 sanding in brake step 2. 11-111-TNC TNC for 150 Sanding Equipment to allow use in step 2. 11-184-TNC Class 153 Sanding in Brake Step 2. 11-185-TNC Class 14X Sanding in Brake Step 2. 11-164-TNC Class 156 sanding in brake step 2 11-137-DGN Fitting manually operated sanders with sanding rate of 2kg/wheel/min to classes 14X and 153 units. 12-124-TNC Class 155 Sanding in Brake Step 2. 12-090-TNC TNC for Class 150 Sanding Equipment to allow use in step 2. 12-137-DGN Position of Sand Delivery System on Plasser 09-4x4/4S. 12-169-TNC Class 156 sanding in brake step 2 12-174-TNC Class 153 Sanding in Brake Step 2. 12-175-TNC Class 14x Sanding in Brake Step 2. 13-011-DGN Derogation to GMRT 2461 Issue 1 – Sanding system for Windhoff MPV on-track machines. 13-068-DGN Railway Undertaking, RSSB Member 13-066-DGN FGW 150 Step 2 Sanding 13-109-DEV Class 155 Sanding in Brake Step 2. 13-074-DEV Class 14x and 153 Sanding in Brake Step 1. 13-075-DEV Class 15x Sanding in Brake Step 1. 13-171-DEV Class 153 Sanding in Brake Step 2. 12-133-DEV Sanding on second, trailing unit 13-180-DEV Additional sanding devices on 11th axle as permissible by TSI CCS (2012/88/EC) while complying to the overall sanding rates as defined by GMRT2461. 14-083-DEV Class 142, 143, 144, 150, 153, 155 and 156 units Sanding in Brake Steps 1 & 2. 14-092-DEV Class 387 Sanding on Trailing Units. 14-097-DEV Class 142, 143, 144, 150, 153, 155 and 156 manual sander systems; sand application prior to commencement of braking. 14-155-DEV Class 377 Sanding on Trailing Units. 14-120-DEV Sheffield Tram Train Sanding, Issue 2. 15-060-DEV Sanding on trailing units with manual sanders. 15-061-DEV Revised 05 10 2015 Automatic sanding on trailing units with automatic detection of low adhesion (using Wheel Slide Protection (WSP)). 16-017-DEV Sanding Positions 14-120-DEV_Revised_19-02-2017 14-120-DEV Revised 22 03 2017 View All