RIS-2714-RST Iss 1
Axle Bearing Condition Monitoring
Synopsis
This document sets out requirements and guidance for condition monitoring of axle bearings, whether by trackside or onboard detection systems.
Summary Of Changes
RIS-2714-RST Iss 1 has been created from the content of GERT8014 Iss 2 and associated content in GEGN8614 Iss 1, both of which have now been withdrawn. GERT8014 Iss 2 contained numerous requirements which were either not valid National Technical Rules (NTRs) or duplicated requirements already set out in the Locomotive and Passenger (LOC&PAS) National Technical Specification Notice (NTSN) giving the reason for adapting the standard for publication as a RIS. RIS-2714-RST Iss 1 also gives new guidance on dynamic frequency monitoring which was not previously included in a standard.
Additionally, RIS-2714-RST Iss 1 contains updated legislative references following the UK’s departure from the EU, including changing from TSIs to NTSNs, as well as the incorporation of findings from recent RSSB research projects.
17/10/2024 - RST SC at its meeting in Sept 24 approved the 12m review recommendation. No further action required.
Optional reading and resources:
Standards quarterly webinar - June 2023

- Issued:
- 03/06/2023
- Published:
- 03/06/2023
- Last Review:
- 05/09/2024
- Next Review:
- 03/06/2029
Details
Consultation Status | Closed |
Vehicle Assessment | Yes |
Supersedes | GEGN8614 Iss 1, GERT8014 Iss 2 |
Lead Committee | Rolling Stock - RST |
Supporting Committee | Infrastructure - INS; Plant - PLT; Control Command and Signalling - CCS; Traffic Operation and Management - TOM |
Briefing Notes | 23 BN10 |
Impact Assessments
![]() Registered |
23 IA08 |