Standards Catalogue

ERTMS/ETCS DMI National Requirements

This document sets out requirements for European Rail Traffic Management System/European Train Control System (ERTMS/ETCS) Driver Machine Interface…

Traction batteries in rolling stock depots

The technical note aims to inform the industry on handling, storage and the safe maintenance practices of lithium-ion traction battery packs within…

Fire compartmentation and Li-ion traction batteries

The technical note aims to inform the industry on adequate design considerations for crashworthiness and fire barrier considerations to minimise the…

Application of Standard Vehicle Gauges

This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure.

Changes to National Operations Publications for June 2025

This document is primarily used to publish minor changes to National Operations Publications (NOPs) and has been re-issued, taking into consideration…

Application of the Entity in Charge of Maintenance Regulations

This document gives guidance on the application of regulations on entities in charge of maintenance (ECM) with respect to freight wagons that are used…

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Verification of Conformity of Engineering Change to Rail Vehicles

The document sets out a process for verification of conformity of engineering change against applicable requirements. This process can be adopted by…

Crashworthiness risk assessment for mainline passenger rolling stock

This Technical Note aims to address Recommendation 19 c) of RAIB’s Carmont report. This required RSSB, in consultation with operators of pre-1994…

Onboard passenger air quality improvement

This technical note aims to inform the industry about potential solutions for improving air quality in the passenger cabin environment, referred to in…

Barrow Crossings - Warning Arrangements

Specification for Lubricating Oil for Points and Fishplates

Code of Practice for the Maintenance and Overhaul of Rail Cranes, Facilities and Maintenance Philosophy

Specification for Cast Austentic Manganese Steel Crossing

1.5 KG/3 1b B.C.F Fire Extinguishers: Fire snow International Limited

Safety for the Line Examination of Rail Cranes

Operators Servicing Schedule Kango Lightweight 2.5KVA Generator

Specification for Miniature Tractive Armature D.C Neutral Line Relay Unit (Plug-in Type) for Railway Signalling Purposes

Maintenance Schedule Kango Mark III & IV 4KVA Ballast Tamping Set

Operators Servicing Schedule Kango Mark III & IV 4KVA Ballast Tamping Set

TW3 - Preparation and movement of locomotive-hauled trains

TW2 - Preparation and movement of multiple-unit passenger trains

TW1 - Preparation and movement of trains. General

Working single lines with or without a train staff or token

TW7 - Wrong-direction movements

T11 - Movements of engineering trains under T3 arrangements

T3 - Possession of the line for engineering work

TS2 - Track circuit block regulations

T4 - Possession of a siding for engineering work

AC1 - AC Electrified lines: Part A Dangers of the system, description of equipment and communications. Part B Emergency procedures

Power changeover not applicable

This document provides design details for sign AJ16 – Power changeover not applicable.

Raise pantograph (temporary power changeover)

This document provides design details for sign AJ14 - Raise pantograph (temporary power changeover).

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

ETCS Location Marker

This document provides design details for sign AB10 - ETCS location marker.

Permissible speed acceleration indicator

This document provides design details for sign AD06 - Permissible speed acceleration indicator.

Temporary speed restriction termination - Acceleration indicator

This document provides design details for sign AF09 - Temporary speed restriction termination - Acceleration indicator.

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

Car Stop Markers on Station Platforms

Car Stop Markers on Station Platforms

FTAP Flexible Train Arrival Point

A set of four signs to direct engineering trains or on-track machine to locate the required stopping point within a possession or protection zone when…

Car Stop Markers on Station Platforms

Misuse of MEWPs

This poster is provided by the M&EE Networking Group to remind industry not to misuse MEWPs during work activities.

Plant Exclusion Zones

This poster is provided by the M&EE Networking Group to remind industry about the necessity to keep personnel clear from areas around working…

Emergency Haulage by OTMs

This Code of Practice details the haulage capabilities of on-track machines (OTM). It should be followed by any route or operator control when…

Use and Maintenance of Full Electric/Hybrid Powered OTP

This Code of Practice details best practice for use and maintenance of battery or hybrid powered OTP. It defines best practice and industry guidance…

Injection Injury

This poster details the actions to be taken following a hydraulic injection injury.

Cross Tracking of On Track Plant

OTP must only be on/off tracked within a Possession. OTP is not permitted to cross track under Line Blocks.

AFFF Fire Extinguishers

This poster is provided by the M&EE Networking Group to remind industry about the potential for AFFF fire extinguishers to freeze in cold weather.…

RRV Braking

This poster is provided by the M&EE Networking Group to remind industry is a reminder that road-rail vehicles when in rail mode take a lot longer to…

Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Plant Activities with Any Line Open

All plant activities that could foreseeably foul an open line require a documented ALO Plan, which must be approved by a Responsible ALO Manager.