Standards Catalogue

Duties of the person in charge of the possession (PICOP)

You will need this handbook if you carry out the duties of the PICOP.

Duties of the person in charge of the possession (PICOP) on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the person in charge of the possession (PICOP) on ERTMS lines. This document has been…

Rolling Stock Electromagnetic Compatibility with Trackside CCS Subsystems

This document gives guidance on achieving rolling stock electromagnetic compatibility with control, command and signalling (CCS) subsystems, through…

Track System Requirements

This document sets out Great Britain (GB) requirements in scope of the national technical rules for track geometry, track systems and track components…

GB Requirements for Platform Height, Platform Offset and Platform Width

GIRT7020 Issue 2 sets out GB requirements in scope of National Technical Rules for platform height, platform offset and platform width.

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Possession Arrangements Form

This form is used by the PICOP to record the arrangements for a possession of a running line.

Rail Industry Standard on Signal Overrun Risk Evaluation and Assessment

This document sets out the approach for the management of signal overrun risk consistent with the application of the Common Safety Method on Risk…

Mechanical Trainstop System Interface

This document details the track / train interface requirements for mechanical trainstop systems. GERT8018 issue two which has been up-issued following…

Guidance on Mechanical Trainstop System

This document gives guidance on GERT8018 issue two which has been up-issued following completion of the filtering process that identifies that a…

Rolling Stock Electromagnetic Compatibility with Trackside CCS Subsystems

This document gives guidance on achieving rolling stock electromagnetic compatibility with control, command and signalling (CCS) subsystems, through…

Track System Requirements

This document sets out Great Britain (GB) requirements in scope of the national technical rules for track geometry, track systems and track components…

GB Requirements for Platform Height, Platform Offset and Platform Width

GIRT7020 Issue 2 sets out GB requirements in scope of National Technical Rules for platform height, platform offset and platform width.

Size of Vehicles and Position of Equipment

This document sets out Great Britain (GB) requirements in scope of National Technical Rules for the methods of determining the swept envelope of rail…

Rail Industry Standard on Signal Overrun Risk Evaluation and Assessment

This document sets out the approach for the management of signal overrun risk consistent with the application of the Common Safety Method on Risk…

Mechanical Trainstop System Interface

This document details the track / train interface requirements for mechanical trainstop systems. GERT8018 issue two which has been up-issued following…

Guidance on Mechanical Trainstop System

This document gives guidance on GERT8018 issue two which has been up-issued following completion of the filtering process that identifies that a…

Specification for Wire, Hard Drawn Copper, PVC Insulated, High Voltage

RACOP - Train Driving

Persons in Charge of Possession (PICOP) and Engineering Supervisors (ES)

Duties of the person in charge of the possession (PICOP)

You will need this handbook if you carry out the duties of the PICOP.

Duties of the person in charge of the possession (PICOP) on ERTMS lines where lineside signals are not provided

You will need this handbook if you carry out the duties of the person in charge of the possession (PICOP) on ERTMS lines. This document has been…

Possession Arrangements Form

This form is used by the PICOP to record the arrangements for a possession of a running line.

Duties of the person in charge of the possession (PICOP)

You will need this handbook if you carry out the duties of the PICOP.

Duties of the person in charge of the possession (PICOP)

Duties of the person in charge of the possession (PICOP)

Duties of the person in charge of possession (PICOP)

Duties of the person in charge of the possession (PICOP)

Duties of the person in charge of the possession (PICOP)

Duties of the person in charge of the possession (PICOP)

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Planning and Executing Lifting Operations

This Code of Practice concerns all lifting operations involving rail cranes, twin jib cranes, road-rail excavator cranes, and vehicle mounted knuckle…

Code of Practice for OTP Machine ~ Crane Controller Checklists

This Code of Practice details a recommended standard industry checklist for Machine and Crane Controllers when using On-Track Plant. This checklist…

Code of Practice for Plant Modules on Rail Wagons and Trailers

This Code of Practice identifies the process to be undertaken when plant modules are attached to rail wagons or trailers. This covers the use of plant…

Code of Practice for the Storage and Recommissioning of OTP

This Code of Practice is to define the actions that should be taken for any OTP designated as Out of Service recommending a minimum level of…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Code of Practice for OTM Driver Communication Review Group (CRG)

This Code of Practice supports the national strategy for improved Safety Critical Communications.  It provides a collaborative process (M&EE Group OTM…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).