Standards Catalogue

Guidance on wagon maintenance related to recommendations from RAIB reports

This technical note documents findings from all reports, bulletins, and safety digests, published by RAIB, where maintenance of rail wagons has been…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

Junction Signalling

Signalling Control and Indication System (Appendix E)

AWS EP Repeat & Horn Relay Unit & Base

Signalling into Terminal & Bay Platforms

ATC (AWS) Isolating & Change End Switches

Specification for Thermo-Plastic Insulators for use with Concrete Sleepers Incorporating 'Cast-In' Shoulder Inserts for Pandrol Rail Clips

Nomenclature of Running Signals

Nomenclature of Running Signals

Signal Post Identification Signs

Location of Signal Post Telephones

Activation of TPWS or ERTMS tri

This form is used by a signaller to record information obtained from drivers after the activation of TPWS, except when a signal has been passed at…

Duties of the person in charge of the siding possession (PICOS)

You will need this handbook if you carry out the duties of a PICOS.

Track circuit block regulations

You will need this module if you carry out the duties of a signaller in a track circuit block area.

Duties of the COSS and person in charge when using a hand trolley

You will need this handbook if you are the COSS or SWL and person in charge when using a hand trolley.

Station duties and train dispatch

You will need this module if you carry out the duties of a driver, a guard, a person in charge (PIC) of dispatch or staff responsible for train…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Shunting

You will need this module if you carry out the duties of a driver, guard, shunter or signaller.

Failure of, or work on, signalling equipment - signallers' regulations

You will need this module if you carry out the duties of a signaller.

Rule Book Module Issue History

This document contains updates to align with changes to Rule Book module issues (GERT8000).

Preparation and movement of trains

You will need this module if you carry out the duties of a driver, guard, shunter, signaller or train preparer.

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

ETCS Location Marker

This document provides design details for sign AB10 - ETCS location marker.

Permissible speed acceleration indicator

This document provides design details for sign AD06 - Permissible speed acceleration indicator.

Temporary speed restriction termination - Acceleration indicator

This document provides design details for sign AF09 - Temporary speed restriction termination - Acceleration indicator.

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

This document provides design details for CC16 sign - Supplementary sign where crossing is used for animal traffic (PCR diagram 118).

Car Stop Markers on Station Platforms

Car Stop Markers on Station Platforms

FTAP Flexible Train Arrival Point

A set of four signs to direct engineering trains or on-track machine to locate the required stopping point within a possession or protection zone when…

Car Stop Markers on Station Platforms

No refuges sign

This document provides design details for BA05 sign - No refuges sign.

End of Emergency special Working

This document provides design details for sign AK215 - End of Emergency Special Working

Code of Practice for Plant Modules on Rail Wagons and Trailers

This Code of Practice identifies the process to be undertaken when plant modules are attached to rail wagons or trailers. This covers the use of plant…

Code of Practice for the Storage and Recommissioning of OTP

This Code of Practice is to define the actions that should be taken for any OTP designated as Out of Service recommending a minimum level of…

Code of Practice for Piling using OTP

This Code of Practice details guidance on the arrangements for controlling the risks when planning and undertaking piling operations on the railway…

Code of Practice for OTM Driver Communication Review Group (CRG)

This Code of Practice supports the national strategy for improved Safety Critical Communications.  It provides a collaborative process (M&EE Group OTM…

Code of Practice for Re-railing Kirow Cranes using Outriggers

This Code of Practice provides guidance in the re-railing of Kirow cranes utilising the crane’s outriggers.

Manually propelled equipment in a line blockage

This poster is provided by the M&EE Networking Group to remind industry of the additional measures to take to use manually propelled equipment in a…

Code of Practice for Haulage Capabilities of On Track Machines

This Code of Practice details the haulage capabilities of on track machines (OTM), it should be followed by any route or operator control when…

Code of Practice for Safe Use of Remote Controls

This Code of Practice identifies the safe use of wired and wireless remote controls for OTP, OTM and other machines in the railway environment. The…

Code of Practice for Action following Hydraulic Pump and/or Motor Failure

This Code of Practice details the details the action to be taken following the failure of an hydraulic pump and/or motor on an on-track machine (OTM).

Code of Practice for M&EE Documents

This Code of Practice details the process by which the M&EE Networking Group produces documentation and is intended for internal use of the M&EE…