Standards Catalogue

Guidance on wagon maintenance related to recommendations from RAIB reports

This technical note documents findings from all reports, bulletins, and safety digests, published by RAIB, where maintenance of rail wagons has been…

Guidance on Operational Railway Safety Awareness

This document is aimed at Railway Undertakings and any other railway actors operating in or around the railway environment. It gives guidance on…

Evidence conservation of failed axle bearings in service

This technical note sets out a methodical approach to collecting data at the point of failure and preserving the failed bearings for further analysis…

Master manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Possession Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Signaller and Signalling Technician Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Driver Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Track Workers Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

Train Operations Staff Manual

The Rule Book manuals have been produced to provide end-users with access to the content of the Rule Book that is relevant to their roles, e.g.…

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

Examination and repair of structural corrosion in Mark 1 type rolling stock

This technical note will help those maintaining or repairing Mark 1 type rolling stock to detect and remedy corrosion on this type of vehicle. This…

Communication of urgent operating advice

This standard sets out requirements, rationale and guidance for reporting and communicating urgent operating safety information.

Reporting of adverse events

This technical note will help industry to understand the reporting systems for safety related issues provided by the Rail Safety and Standards Board…

Urgent High-Risk Defect Report Form

In the event that the NIR-Online system is unavailable, details of urgent high-risk defects, faults and failures shall be shared by completing and…

Assessment of Passenger Seat Comfort

This document gives guidance on the assessment of static comfort for passenger seats on rolling stock. It includes criteria to measure aspects of a…

ERTMS/ETCS Baseline 3 Onboard Subsystem Requirements

This document sets out the industry agreed requirements and guidance for the Great Britain (GB) application of the ERTMS/ETCS Baseline 3 onboard…

Lineside Operational Signs - Product Requirements

This document sets of the requirements of lineside operational signs that support technical compatibility with rail vehicle exterior lighting and…

Movement of Continental Wagons on the GB Network

RIS-2770-RST Iss 1 sets out requirements and guidance around the process of registering and assessing compatibility of wagons not registered in GB for…

Rail Vehicle Structures and Passive Safety

This document sets out requirements for the design and integrity of primary and secondary rail vehicle structures, including interior crashworthiness.

Management of Safety-Related Rail Vehicle Defects

This document defines requirements for recording, analysing and reporting safety-related defects, faults and failures on rail vehicles, plant and…

Section P(i) - Working of single lines

Section T(iii) - Protection of engineering work when the engineer takes possession of the line

Section B(i) - Your safety when you are walking on or near the line

Section E - Failure, repair, renewal and maintenance of signalling equipment

Section R - Loading or unloading rail vehicles during engineering work

Section V - Broken rails and bridge strikes

Section R - Loading or unloading rail vehicles during engineering work

Section B(ii) - Your safety when you are working on or near the line

Section E - Failure, repair, renewal and maintenance of signalling equipment

Section H(ii) - Working of trains-out of course working and defective vehicles

ETCS stop marker

This document provides design details for sign AB08 - ETCS stop marker.

ETCS Location Marker

This document provides design details for sign AB10 - ETCS location marker.

Permissible speed acceleration indicator

This document provides design details for sign AD06 - Permissible speed acceleration indicator.

Temporary speed restriction termination - Acceleration indicator

This document provides design details for sign AF09 - Temporary speed restriction termination - Acceleration indicator.

Supplementary sign where crossing is used for animal traffic (PCR diagram 118)

This document provides design details for CC16 sign - Supplementary sign where crossing is used for animal traffic (PCR diagram 118).

Car Stop Markers on Station Platforms

Car Stop Markers on Station Platforms

FTAP Flexible Train Arrival Point

A set of four signs to direct engineering trains or on-track machine to locate the required stopping point within a possession or protection zone when…

Car Stop Markers on Station Platforms

No refuges sign

This document provides design details for BA05 sign - No refuges sign.

End of Emergency special Working

This document provides design details for sign AK215 - End of Emergency Special Working

Code of Practice for Audit Protocol for Supply of Machine / Crane Controllers

This Audit Protocol provides a comprehensive list of questions for an auditor to ask and detailed guidance of what is expected of an auditor whilst…

Code of Practice for Flailing Operations Using OTP

Code of Practice for OTP Recovery

Have you had your brief

Code of Practice for Safety Related Defect Reporting for OTP and Plant & Equipment

Code of Practice for Handling Serviceable Rail with RRV Excavator Cranes including Thimbling

Code of Practice for Tandem Lifting with Two Excavator Cranes

Audit Protocol for Supply of Possession-only Rail Vehicles with and without Operators

Code of Practice for Maintenance, Operation and Testing of Track Jacks

Code of Practice for Operator Competency Standards for On Track Plant